"-----------------------------------------------------------------------------------------------------------------------
" The config is chopped up into sections. Search for these headings to quickly jump to a particular section.
"
" #0 GLOBALS
" #1 PLUGINS
" #2 BASE CONFIG
" #3 CUSTOM AUTOCMDS
" #4 KEY MAPPINGS
" #5 PLUGIN CONFIGS
" #6 VISUALS (COLORS, HIGHLIGHTING)
" #7 CUSTOM FUNCTIONS & COMMANDS
"
" @incomplete Add setup steps (plugins, cache setup, search tool, etc).
"-----------------------------------------------------------------------------------------------------------------------

let g:campo_vimrc_initialized = 0 " Will be set to 1 at the end of the file. Can be used to avoid changes on subsequent vimrc reloads.

scriptencoding utf-8
" @note If the file contains a BOM then vim will automatically set `bomb` for the buffer so that the BOM is written out again.
set encoding=utf-8 fileencoding=utf-8 fileencodings=ucs-bom,utf8,prc
set nocompatible
filetype off

" Store the current system name so that we can conditionally set configs for different platforms.
let s:uname = system("echo -n \"$(uname)\"")
let g:vim_dir = $HOME . "/.vim"
let mapleader=","

function! IsWindows()
    if s:uname =~ "mingw" || s:uname =~ "msys"
        return 1
    endif
    return 0
endfunction

if has('termguicolors')
    set termguicolors
    " Set Vim-specific sequences for RGB colors.
    let &t_8f = "\<Esc>[38;2;%lu;%lu;%lum"
    let &t_8b = "\<Esc>[48;2;%lu;%lu;%lum"
endif

function! PrintError(msg) abort
    exec 'normal! \<Esc>'
    echohl ErrorMsg
    echomsg a:msg
    echohl None
endfunction


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #0 GLOBALS
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||


"-----------------------------------------------------------------------------------------------------------------------
" @note The following globals can be used to customize various functions in
" this file.  The easiest way to set them is in ~/.vimrc.private or an .lvimrc
" file in the root folder that you want it applied to.
"
" Some variables cannot be customized in an .lvimrc because their value is
" used by settings in this file when it's sourced. These have been flagged
" with the note :unsupported-in-lvimrc.
"
" Also take note that an .lvimrc has precedence because it's loaded after this
" and the private vimrc.
"-----------------------------------------------------------------------------------------------------------------------


" @note :unsupported-in-lvimrc
let g:campo_max_line_length = 120 " Display a vertical bar at x=<n>.

" Set the row height of the quickfix pane, which is used to display results
" from various plugins (like ctrlp, ripgrep, compilation errors, etc), in rows
let g:quickfix_pane_height = 20


"##################################################################################
" COLORS
"##################################################################################
let g:campo_light_dark_mode = 'dark' " Start vim with the dark theme. Set to 'light' for the light theme.
let g:campo_dark_theme = 'campo-dark-simple' "'campo-dark-blue'
let g:campo_light_theme = 'campo-light-simple' "'campo-light'
let g:campo_theme_use_rainbow_parens = 1


"##################################################################################
" FORMATTING
"##################################################################################
" When set to 1, all files will be stripped of trailing whitespace when the
" file is saved. Set to 0 to disable. You can customize which files are
" ignored or always stripped; see below.
let g:campo_strip_trailing_whitespace = 1

" When set to 1, the whitespace stripping force/ignore file filters below will
" be expected to have full paths to the files, otherwise just the filename is
" required.
let g:campo_use_full_paths_for_whitespace_stripping_file_filters = 1

" If g:campo_strip_trailing_whitespace is 1 then you can stop stripping in
" specific directories by setting this to a list of full directory paths.
" This has no effect when g:campo_strip_trailing_whitespace is 0.
"
" e.g. let g:campo_directories_to_ignore_when_stripping_trailing_whitespace = ['/z/modules', '/d/build']
let g:campo_directories_to_ignore_when_stripping_trailing_whitespace = []

" If g:campo_strip_trailing_whitespace is 1 then you can stop stripping in
" specific files by setting this to a list of full file paths.
" This has no effect when g:campo_strip_trailing_whitespace is 0.
"
" e.g. let g:campo_files_to_ignore_when_stripping_trailing_whitespace = ['/z/modules/test.h', '/d/build/config.h']
let g:campo_files_to_ignore_when_stripping_trailing_whitespace = []


" If g:campo_strip_trailing_whitespace is 0 then you can force whitespace
" stripping in specific directories by setting this to a list of full paths.
" This has no effect when g:campo_strip_trailing_whitespace is 1.
"
" e.g. let g:campo_directories_to_force_stripping_trailing_whitespace = ['/z/modules '/d/build']
let g:campo_directories_to_force_stripping_trailing_whitespace = []

" If g:campo_strip_trailing_whitespace is 0 then you can force whitespace
" stripping in specific files by setting this to a list of full file paths.
" This has no effect when g:campo_strip_trailing_whitespace is 1.
"
" e.g. let g:campo_files_to_force_stripping_trailing_whitespace = ['/z/modules/test.h', '/d/build/config.h']
let g:campo_files_to_force_stripping_trailing_whitespace = []


"##################################################################################
" SEARCH
"##################################################################################
" This is included in the ripgrep args. You can use this to do things like
" ignore folders in your project or limit the search to specific file types.
" For example, if you want to ignore the 3rd_party dir and only search C files
" (remove the backslash from the first quote as that's just here to escape it
" in this comment string)
" let g:campo_custom_search_args = \"-g \"!3rd_party/*\" -tc"
let g:campo_custom_search_args = ""


"##################################################################################
" CTAGS
"##################################################################################
" I use the ctags executable from https://github.com/universal-ctags/ctags-win32/releases
"
" Be sure to check out the ctags plugin config in section #5 for additional API functions.

" If != 0 then ctag generation will always happen on a file save, otherwise
" it'll only be triggered if the file being saved has an extension in the
" g:campo_extensions_that_run_ctags list.
let g:campo_force_ctags_regardless_of_extension = 0

" If one of these file types are saved then the ctags creation function will be called.
" You can append to this list in another config like so:
"   let g:campo_extensions_that_run_ctags = g:campo_extensions_that_run_ctags + ['foo', 'bar']
let g:campo_extensions_that_run_ctags = ['c','cpp','h','hpp','inc','cs','py','asm','ex','exs']

" Default files and directories that ctags should ignore when doing a
" recursive crawl.
" @note The CreateCtags function will always ignore .git and node_modules
" regardless of this variable's value.
let g:campo_ctags_exclude = ['*.txt', '*.config', '.cache']

" This is included in the ctags autocmd args. You can use this to customize
" how ctags are built.
" Examples:
"  * Recursive ctag generation with `let g:campo_custom_ctags_args = '-R'`
"  * Create tags for specific langauges: `let g:campo_custom_ctags_args = '--languages=C,C++,Elixir'
"    * You can see a list of languages with `ctags --list-languages`
"    * For C# you have to escape the ampersand like so: `--languages=C\\#`
"  * Exclude a directory with `let g:campo_custom_ctags_args = '--exclude=3rd_party'`
let g:campo_custom_ctags_args = ""


"##################################################################################
" JAI
"##################################################################################
" Set to your Jai install path. Used for various commands, like for example
" searching the modules and how_to directories with CtrlP
let g:campo_jai_path = ''

" Args to include when compiling a Jai file.
let g:campo_jai_build_args = ''


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #1 PLUGINS
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

call plug#begin('~/.vim/plugged')

"##################################################################################
" MISC
"##################################################################################

Plug 'vim-airline/vim-airline'        " Enhanced status/tabline.
Plug 'embear/vim-localvimrc'          " Add a .lvimrc to a folder to override .vimrc config.
Plug 'tpope/vim-obsession'            " Continuously updated session files (tracks window positions, open folds, etc).
Plug 'tpope/vim-fugitive'             " Git wrapper (I particularly like :Gblame, which I've wrapped as :Blame)
Plug 'sir-pinecone/vim-ripgrep'       " Fast grep-like search. Requires ripgrep; install Rust package: `cargo install ripgrep`.
Plug 'itchyny/vim-cursorword'         " Underlines all instances of the symbol under the cursor.
Plug 'airblade/vim-gitgutter'         " Displays a git diff in the vim gutter and allows staging/unstaging of hunks.
Plug 'ctrlpvim/ctrlp.vim'             " Fuzzy file, buffer, mru, tag, etc finder.
Plug 'majutsushi/tagbar'              " Display ctags in a window, ordered by scope.
Plug 'tommcdo/vim-lion'               " For text alignment, use gl= and gL=
Plug 'tpope/tpope-vim-abolish'        " Easily search for, substitute, and abbreviate multiple variants of a word. Add them to `vim/after/plugin/abolish.vim`
Plug 'vim-scripts/AnsiEsc.vim'        " Ansi escape sequences concealed, but highlighted as specified.
Plug 'sir-pinecone/errormarker.vim'   " Build error highlighting (requires skywind3000/asyncrun.vim).
Plug 'skywind3000/asyncrun.vim'       " Async commands.
Plug 'nelstrom/vim-qargs'             " For the GlobalReplaceIt function (i.e. search and replace).
Plug 'editorconfig/editorconfig-vim'  " Adds support for .editorconfig files.

if IsWindows()
    Plug 'suxpert/vimcaps'            " Disable capslock (useful if the OS isn't configured to do so).
endif

"##################################################################################
" COLORS
"##################################################################################

Plug 'luochen1990/rainbow', { 'commit': '1c45e0f' } " Rainbow parens. Locked to an older commit that still works fine on my PC.
Plug 'vim-airline/vim-airline-themes'

if IsWindows()
    Plug 'godlygeek/csapprox'         " Try to make gvim themes look decent on Windows.
endif

Plug 'dracula/vim', { 'as': 'dracula' }

"/////////////////////////////////////////////////
" SYNTAX HIGHLIGHTING
"/////////////////////////////////////////////////

Plug 'rluba/jai.vim'                    " Jai
Plug 'bfrg/vim-cpp-modern'              " C/C++
Plug 'fedorenchik/fasm.vim'             " Flat Assembler
Plug 'elixir-editors/vim-elixir'        " Elixir
Plug 'pprovost/vim-ps1'                 " PowerShell
Plug 'tpope/vim-markdown'               " Markdown
"Plug 'vim-ruby/vim-ruby'                " Ruby
"Plug 'fatih/vim-go'                     " Go
"Plug 'rust-lang/rust.vim'               " Rust
"Plug 'jdonaldson/vaxe'                  " Haxe

"
"
"

call plug#end()
filetype plugin indent on


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #2 BASE CONFIG
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

set hidden
set history=10000
set expandtab
set tabstop=4
set shiftwidth=4
set softtabstop=4
set autoindent
set laststatus=2
set showcmd                       " Display incomplete commands.
set showmatch
set incsearch                     " Highlight matches as you type.
set hlsearch                      " Highlight matches.
set dictionary+=/usr/share/dict/words
"set clipboard=unnamed            " Yank and paste with the system clipboard.
set number
set ignorecase smartcase          " Make searches case-sensitive only if they contain upper-case characters.
set visualbell                    " No bell sounds.
set ttyfast
set cmdheight=2
set switchbuf=useopen,split
set numberwidth=5
set showtabline=2
set winwidth=79

 " Use abbreviations.
set shortmess=a

" Remove gvim Menubar and Toolbar
"set guioptions -=m
"set guioptions -=T

" @warning: This must come AFTER `set ignorecase smartcase` otherwise vim spews out a ton of errors. No idea why!
if IsWindows()
  " Just assume we don't have a zsh shell
  set shell=bash
else
  "set shell=zsh
  set shell=bash
endif

set t_ti= t_te=                   " Prevent Vim from clobbering the scrollback buffer. See http://www.shallowsky.com/linux/noaltscreen.html
set scrolloff=3                   " keep more context when scrolling off the end of a buffer
set cursorline
set cursorcolumn

" Store swap, backup and undo files in a central spot. I have my settings in a
" `vimrc.private` so that my drive paths aren't in this config. If you want to
" set them here then add:
"
" set directory=<dir path for swap files>
" set backupdir=<dir path for backup files>
" if has('persistent_undo')
"    set undodir=<dir path for undo files>
" endif
"
" And make sure those directories exist before opening vim.
"
set backup
set backupcopy=yes
augroup backupCmds
    autocmd!
    autocmd BufWritePre * let &bex = '.' . strftime("%Y-%m-%d-%T") . '.bak'
augroup END
set writebackup                   " Make buckup before overwriting the current buffer.

" Keep undo history across sessions by storing it in a file. The undo save
" location is set in the vimrc.private file. You can also set it here with:
" set undodir=<path>
"
set undolevels=1000               " Allow undo when going back into a closed file
set undoreload=10000
if has('persistent_undo')
    set undofile
endif

set backspace=indent,eol,start    " Allow backspacing over everything in insert mode.

set complete+=kspell              " Spell checking autocomplete.
set complete-=i                   " Don't scan all included files since it's really slow.

set termguicolors
syntax on                         " Enable highlighting for syntax

set wildmenu
set wildmode=longest,list,full
set wildignore+=*/log/*,*.so,*.swp,*.zip,*/rdoc/*

if executable('rg')
    set grepprg=rg\ --vimgrep\ --hidden " Requires ripgrep to be installed.
endif

set list listchars=tab:»·,trail:· " Show trailing whitespace.

set timeoutlen=300 ttimeoutlen=0  " Adding this since the esc remap on the 'i' key had a long delay when pressed.

" @fixme might be broken if lowered to 100 from original value of 4000. Will
" first try 500 and tweak from there.
" UPDATE: I lowered this to 250 and eventually started seeing some plugin
" errors related to paren formatting. I think 800 might be the sweet spot.
set updatetime=800                " I lowered this to make git-gutter updates faster.

" Fix vim's background colour erase - http://snk.tuxfamily.org/log/vim-256color-bce.html
if &term =~ '256color'
    " Disable Background Color Erase (BCE) so that color schemes
    " work properly when Vim is used inside tmux and GNU screen.
    " See also http://snk.tuxfamily.org/log/vim-256color-bce.html
    set t_ut=
endif

" Status line
set statusline=%<%f\ (%{&ft})\ %-4(%m%)%=%-19(%3l,%02c%03V%)

" Disable arrow keys.
noremap <up> <nop>
noremap <down> <nop>
noremap <left> <nop>
noremap <right> <nop>
inoremap <up> <nop>
inoremap <down> <nop>
inoremap <left> <nop>
inoremap <right> <nop>


"/////////////////////////////////////////////////
" LOAD PRIVATE VIMRC
"/////////////////////////////////////////////////

" This should be done after above base settings that don't use the global
" campo variables.
"
" You can further customize things in a private vimrc. I use this for things
" that I don't want included in my public dotfiles repo such as temp file settings.
if filereadable($HOME . "/.vimrc.private")
    source $HOME/.vimrc.private
endif


" Settings that use the global campo variables:
let &colorcolumn=g:campo_max_line_length


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #3 CUSTOM AUTOCMDS
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

augroup campoCmds
    " Clear all autocmds in the group.
    autocmd!

    " Automatically wrap at N characters.
    autocmd FileType gitcommit setlocal colorcolumn=72
    " @flagged for removal. It's a bit annoying.   autocmd BufRead,BufNewFile *.{md,txt,plan} exec "setlocal textwidth=".g:campo_max_line_length

    " Enable spell checking by default.
    autocmd FileType gitcommit,markdown,text setlocal spell

    " Jump to last cursor position unless it's invalid or in an event handler.
    autocmd BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g`\"" | endif

    " Properly indent schemes (scheme, racket, etc).
    autocmd BufRead,BufNewFile *.{lisp,scm,rkt} setlocal equalprg=scmindent.vim.rkt

    " Elixir indent
    autocmd FileType elixir setlocal tabstop=2 | setlocal shiftwidth=2 | setlocal softtabstop=2

    " Fasm indent; uses the fedorenchik/fasm.vim plugin.
    autocmd BufReadPre *.asm let g:asmsyntax = "fasm"

    " Auto reload VIM when settings changed.
    " Need to use silent! now because the save commands call a custom function
    " and without the silent we would see an error after sourcing saying that
    " we can't redefine the function that initiated the save. :ReloadVimrcError
    "
    " @fixme Reload lvimrc after sourcing this file on a save. I tried calling
    " a function that does the source and a call to lvimrc's API but got an
    " error complaining that the function cannot be created while it's in use.
    autocmd BufWritePost .vimrc silent! source $MYVIMRC
    autocmd BufWritePost *.vim silent! source $MYVIMRC
    autocmd BufWritePost ~/.vimrc.private silent! source $MYVIMRC
    autocmd BufWritePost ~/.vimrc_templates.private silent! source $MYVIMRC

    " Remove trailing whitespace when saving any file.
    function! StripTrailingWhitespaces()
        if g:campo_strip_trailing_whitespace == 1
            if len(g:campo_directories_to_ignore_when_stripping_trailing_whitespace)
                for path in g:campo_directories_to_ignore_when_stripping_trailing_whitespace
                    if path == expand('%:p:h')
                        return
                    endif
                endfor
            endif
            if len(g:campo_files_to_ignore_when_stripping_trailing_whitespace)
                for filename in g:campo_files_to_ignore_when_stripping_trailing_whitespace
                    if (g:campo_use_full_paths_for_whitespace_stripping_file_filters == 1 && filename == expand('%:p')) || (g:campo_use_full_paths_for_whitespace_stripping_file_filters == 0 && filename == expand('%:t'))
                        return
                    endif
                endfor
            endif
        else
            let l:found_match = 0

            if len(g:campo_directories_to_force_stripping_trailing_whitespace)
                for path in g:campo_directories_to_force_stripping_trailing_whitespace
                    if path == expand('%:p:h')
                        let l:found_match = 1
                        break
                    endif
                endfor
            endif

            if l:found_match == 0 && len(g:campo_files_to_force_stripping_trailing_whitespace)
                for filename in g:campo_files_to_force_stripping_trailing_whitespace
                    if (g:campo_use_full_paths_for_whitespace_stripping_file_filters == 1 && filename == expand('%:p')) || (g:campo_use_full_paths_for_whitespace_stripping_file_filters == 0 && filename == expand('%:t'))
                        let l:found_match = 1
                        break
                    endif
                endfor
            endif

            if l:found_match == 0
                return
            endif
        endif

        let l = line(".")
        let c = col(".")
        %s/\s\+$//e
        call cursor(l, c)
    endfun
    autocmd BufWritePre * call StripTrailingWhitespaces()

augroup END


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #4 KEY MAPPINGS
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||


"##################################################################################
" MISC
"##################################################################################

" Lowercase the e (have a habit of making it uppercase).
:ca E e

" Mapping ESC in insert mode and command mode to double i.
imap jj <Esc>

" Suspend vim process and return to the shell. Can return to vim with `fg`.
nnoremap <leader>z <c-z>

" edit a file
nnoremap <leader>e :e

" Open the vimrc file for editing / reload vimrc file.
nnoremap <silent> <leader>ev :vsp $MYVIMRC<cr>
nnoremap <silent> <leader>pv :vsp ~/.vimrc.private<cr>
nnoremap <silent> <leader>rv :source $MYVIMRC<cr>

" Type %/ in the command bar to have it replaced with the current buffer's
" path if the file is on disk. One thing I noticed is that you have to type
" the full %/ quickly otherwise it won't replace it.
cmap %/ %:p:h/

" Open a terminal within vim. Use `exit` to close it.
" DISABLING because I don't use this and I want to use the <leader>t for opening my todo file.
"if exists(':terminal')
"    noremap <leader>t :terminal<cr>
"    tnoremap <leader>te <C-\><C-n>
"    tnoremap <A-h> <C-\><C-n><C-w>h
"    tnoremap <A-j> <C-\><C-n><C-w>j
"    tnoremap <A-k> <C-\><C-n><C-w>k
"    tnoremap <A-l> <C-\><C-n><C-w>l
"    nnoremap <A-h> <C-w>h
"    nnoremap <A-j> <C-w>j
"    nnoremap <A-k> <C-w>k
"    nnoremap <A-l> <C-w>l
"endif

" Jump to other buffers.
noremap <c-k> <c-w><Up>
noremap <c-j> <c-w><Down>
noremap <c-l> <c-w><Right>
noremap <c-h> <c-w><Left>

" Make it easier to jump around the command line. The default behaviour is
" using the arrow keys with or without shift.
:cnoremap <C-J> <S-Left>
:cnoremap <C-K> <S-Right>

" Window splitting - couldn't figure out how to remap <c-w>v & <c-w>n to <c-m>
" & <c-n>
noremap <leader>m :vsplit<cr>
noremap <leader>mm :split<cr>

" Forward delete and replace a word.
noremap <leader>d ciw

" Allow fast pasting by accessing the system clipboard register.
noremap <leader>p "+p
" Likely won't need to use this if pasting with <leader>p, but just in case here ya go.
noremap <leader>pp :set paste! paste?<cr>

" Toggle line numbers.
noremap <leader>o :set number! number?<cr>

" Show spell checking.
" You can add new entries to the dict by moving the cursor over the word and pressing `zg`.
noremap <leader>j :exec &spell==&spell? "se spell! spelllang=en_us" : "se spell!"<cr>
noremap <leader>= z=

" Clear the search buffer (highlighting) when hitting return.
nnoremap <cr> :nohlsearch<cr>

" Switch to the previous file.
nnoremap <leader><leader> <c-^>

" Replace currently selected text with default register without yanking it.
vnoremap p "_dP

" Switch between C++ source and header files.
noremap <leader>v :e %:p:s,.h$,.X123X,:s,.cpp$,.h,:s,.X123X$,.cpp,<CR>
"noremap <leader>vv :e %:p:s,.h$,.X123X,:s,.c$,.h,:s,.X123X$,.c,<CR>
"noremap <leader>vvv :e %:p:s,.h$,.X123X,:s,.cc$,.h,:s,.X123X$,.cc,<CR>

" Replace all instances of the highlighted text with whatever you enter.
nnoremap <c-g> :%s///g<left><left>


"##################################################################################
" SAVING AND QUITING
"##################################################################################

" I used to have a BufWritePost autocommand that ran the ctags generator but
" it ends up running multiple times when saving multiple buffers at once. In
" order to only call it once for a group of saves I've had to remap the
" various save commands to a function call.

function! CreateCtags()
    " Only allow one instance of ctags to run in this directory at any given time.
    let l:lock_file = "ctags.lock"
    if filereadable(l:lock_file) || filereadable("newtags")
        " Don't print a warning because this will always show when saving multiple files at the same time with a :wa or :xa
        return
    endif

    let l:extension = tolower(expand('%:e'))
    if (g:campo_force_ctags_regardless_of_extension == 0) && (index(g:campo_extensions_that_run_ctags, l:extension) < 0)
        "echo "Skipping ctags generation"
        return
    endif

    " Abort if we're editing a text file. This won't be an exhaustive
    " filter. We can restrict what goes into the tag file
    " First determine if we're in a root drive directory. If we are then
    " we bail because we don't want to recurse across the entire drive!
    let l:path = expand('%:p:h')
    let l:path_without_slashes = substitute(l:path, "/", "", "g")
    if (strchars(l:path) - strchars(l:path_without_slashes)) <= 1
        call PrintError("Not going to run ctags because the file is in a root drive directory")
        return
    endif

    " Always ignore .git and node_modules
    let g:campo_ctags_exclude = g:campo_ctags_exclude + ['.git', 'node_modules']
    let l:exclude_list = ""
    for name in g:campo_ctags_exclude
        let l:exclude_list .= "--exclude=" . name . " "
    endfor

    " Include local variables for C-like languages.
    let l:ctags_cmd = 'ctags '.l:exclude_list.' '.g:campo_custom_ctags_args.' --c-types=+l --c++-types=+l -o newtags'

    " Add the filename to the ctags command if not running in recursive mode.
    let l:recursive = matchstr(g:campo_custom_ctags_args, '\(-R\s\)\|\(-R$\)\|\(--recurse=yes\)\|\(--recurse\s\)\|\(--recurse$\)')
    if l:recursive == ''
        let l:ctags_cmd .= ' ' . expand('%:t')
        echo "Creating non-recursive ctags"
    else
        echo "Creating recursive ctags"
    endif

    " The ampersand at the end is to make this run in the background. I had to group the
    " commands in parens to make the chained commands run in the background.
    let l:cmd = '!(touch '.l:lock_file.'; '.l:ctags_cmd.'; mv newtags tags &>/dev/null; rm '.l:lock_file.') &'
    silent! exec l:cmd
endfun

" @note We have an autocmd that reloads the vimrc files after they're saved.
" These write functions below will not be reloaded because they initiate the
" save. So if you make changes to them then you need to manually reload this
" file using <leader>rv or whatever. :ReloadVimrcError
function! WriteCurrentFileAndCreateCtags()
    write!
    call CreateCtags()
endfunction

function! WriteCurrentFileAndCreateCtagsThenQuit()
    write!
    call CreateCtags()
    quit
endfunction

" @fixme Sometimes a :wa that saves multiple files causes vim to hang and use a lot of CPU.
function! WriteAllModifiedFilesAndCreateCtags()
    wall!
    call CreateCtags()
endfunction

cnoreabbrev w  :call WriteCurrentFileAndCreateCtags()
cnoreabbrev W  :call WriteCurrentFileAndCreateCtags()
cnoreabbrev wa :call WriteAllModifiedFilesAndCreateCtags()
cnoreabbrev Wa :call WriteAllModifiedFilesAndCreateCtags()
cnoreabbrev WA :call WriteAllModifiedFilesAndCreateCtags()
cnoreabbrev wq :call WriteCurrentFileAndCreateCtagsThenQuit()
cnoreabbrev Wq :call WriteCurrentFileAndCreateCtagsThenQuit()
cnoreabbrev WQ :call WriteCurrentFileAndCreateCtagsThenQuit()

nnoremap <leader>w :call WriteCurrentFileAndCreateCtags()<cr>
nnoremap <leader>x :call WriteCurrentFileAndCreateCtagsThenQuit()<cr>
nnoremap <leader>q :q<cr>

cnoreabbrev Q q
cnoreabbrev Qa qa
command! Qa qall
" Disable Ex mode.
noremap Q <Nop>


"##################################################################################
" MULTIPURPOSE TAB KEY
"##################################################################################
function! InsertTabWrapper()
    let l:col = col('.') - 1
    if !l:col || getline('.')[l:col - 1] !~ '\k'
        return "\<tab>"
    else
        return "\<c-p>"
    endif
endfunction
inoremap <tab> <c-r>=InsertTabWrapper()<cr>
inoremap <s-tab> <c-n>


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #5 PLUGIN CONFIGS
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||


"##################################################################################
" LOCAL VIMRC
"##################################################################################
let g:localvimrc_sandbox = 0
let g:localvimrc_ask = 0

"##################################################################################
" EDITOR CONFIG
"##################################################################################
let g:EditorConfig_exclude_patterns = ['fugitive://.*']

"##################################################################################
" LION (TEXT ALIGNMENT)
"##################################################################################
let b:lion_squeeze_spaces = 1

"##################################################################################
" TAGBAR
"##################################################################################
noremap <F12> :TagbarToggle<cr>
" Sort tags by their order in the source file. Press 's' to sort them alphabetically.
let g:tagbar_sort = 0

"##################################################################################
" GITGUTTER
"##################################################################################
let g:gitgutter_enabled = 1
let g:gitgutter_highlight_lines = 0

nnoremap <leader>hh :GitGutterToggle<cr>
nmap <leader>ha <Plug>(GitGutterStageHunk)
nmap [h <Plug>(GitGutterNextHunk)
nmap ]h <Plug>GitGutterPrevHunk

augroup gitGutterPluginCmds
    autocmd!
    " Update marks on save
    autocmd BufWritePost * GitGutter
augroup END

"##################################################################################
" SYNTASTIC
"##################################################################################
" NOTE: there is a status line config in the status line section
let g:syntastic_always_populate_loc_list = 1
let g:syntastic_auto_loc_list = 1
let g:syntastic_check_on_open = 0
let g:syntastic_check_on_wq = 0

" Customize Rust
" https://github.com/rust-lang/rust.vim/issues/130
" Can remove once this Syntastic PR is merged https://github.com/rust-lang/rust.vim/pull/132
"let g:syntastic_rust_rustc_exe = 'cargo check'
"let g:syntastic_rust_rustc_fname = ''
"let g:syntastic_rust_checkers = ['rustc']

"##################################################################################
" RIPGREP
"##################################################################################
let g:rg_highlight = 1
let g:rg_window_height = g:quickfix_pane_height

"##################################################################################
" C-TAGS
"##################################################################################
" Set extra paths to use when searching for ctags files. By default the current
" directory is always checked. You can use this to combine tag lookups from
" different projects, e.g. set it to the Jai directory and you can look up
" current project tags and Jai module tags (of course this isn't needed if you
" have Jai module tags in your local file).
"
" This destructively overwrites the tags option value.
"
" Call this from a .vimrc.private or .lvimrc file, e.g.
"   call g:SetExtraCtagsPaths([g:campo_jai_path.'/tags'])
"
function! g:SetExtraCtagsPaths(paths_array)
    let l:list = './tags,tags' " This is the default tags list set by vim.
    for path in a:paths_array
        let l:list .= ',' . path
    endfor
    let &tags=l:list
endfunction

"##################################################################################
" CTRL-P
"##################################################################################
" keybindings:
"
" leader-f         = open CtrlP in tag searching mode.
" leader-g         = open CtrlP in file searching mode.
" ctrl-f           = toggle search mode
" enter            = open result in a current buffer or in an already open buffer for that file.
" ctrl-v           = open result in a vertically-split buffer.
" ctrl-h           = open result in a horizontally-split buffer.
" ctrl-t           = open result in a new tab.
" ctrl-j | ctrl-k  = move up and down the search results.
" ctrl-y           = create file and open it.
" ctrl-z           = mark multiple file search results to open (I think you can only use ctrl-v or ctrl-x and not enter).
" ctrl-o           = ask how to open a file search result.
" ctrl-o           = ask how to open a file search result.
" ctrl-p | ctrl-n  = traverse search history.

" CtrlP finds the tags file by using vim's 'tags' option value. I initially
" tried changing the tags value to the working_path if one is provided. I made
" a copy of the current tags value and attempted to restore it when CtrlP was
" exited without an action or a tag action took place. I wasn't able to get
" the tags restored because there's no vim event that gets triggered when a
" tag is opened using the :tag comment. I tried a bunch of autocmds on buffer,
" window and cmdline events but wasn't able to find anything that fired AFTER
" the tag command. So we're instead just setting the tags list once for the
" session and not bothering with changing it on the fly. See g:SetExtraCtagsPaths
function! CtrlP_Search(search_path)
    " If a:search_path is empty then ctrlp will use g:ctrlp_working_path_mode to determine the cwd to search in.
    execute 'CtrlP ' . a:search_path
endfunction

function! CtrlP_JaiSearch(jai_rel_search_path)
    if g:campo_jai_path == ''
        call PrintError("g:campo_jai_path isn't set!")
        return
    endif
    let l:path = g:campo_jai_path
    if a:jai_rel_search_path != ''
        let l:path .= '/' . a:jai_rel_search_path
    endif
    if !isdirectory(l:path)
        call PrintError("Directory ".l:path." doesn't exist.")
        return
    endif
    call CtrlP_Search(l:path)
endfunction

" CtrlP File Searching
noremap <leader>g  :call CtrlP_Search('')<cr>            " Search in current directory
noremap <leader>gg :call CtrlP_JaiSearch('')<cr>         " Search in Jai directory
noremap <leader>gm :call CtrlP_JaiSearch('modules')<cr>  " Search in Jai modules
noremap <leader>gh :call CtrlP_JaiSearch('how_to')<cr>   " Search in Jai how_to
noremap <leader>ge :call CtrlP_JaiSearch('examples')<cr> " Search in Jai examples

let g:ctrlp_map = '<leader>f'
let g:ctrlp_cmd = 'CtrlPTag' " Search tags by default.
let g:ctrlp_by_filename = 1  " File search by filename as opposed to full path.
let g:ctrlp_match_window = 'bottom,order:ttb,min:10,max:'.g:quickfix_pane_height.',results:'.g:quickfix_pane_height
let g:ctrlp_use_caching = 1
let g:ctrlp_clear_cache_on_exit = 1 " No need to keep cache for now since I mostly work in git repos. Press F5 inside CtrlP to rebuild the cache.
let g:ctrlp_working_path_mode = 'ra' " Search from nearest ancestor of the current file that contains .git OR directory of the current file unless it's a subdirectory of the cwd
let g:ctrlp_switch_buffer = 'et' " If a file is already open, open it again in a new pane instead of switching to the existing pane
let g:ctrlp_custom_ignore = '\v[\/]\.(git|hg|svn)$'
let g:ctrlp_user_command = ['.git', 'cd %s && git ls-files -co --exclude-standard'] " If a git repo, use checked in files (ignore things in .gitignore); fallback to globpath()

"##################################################################################
" GIT
"##################################################################################
noremap <leader>gb :Git blame -w<cr>
" Ignore whitespace changes; follow renames and copies.
command! -bar -bang -nargs=* Blame :Git blame<bang> -wCM <args>
command! -bar -bang -nargs=* Gblame :Git blame<bang> -wCM <args>

"##################################################################################
" GIST VIM
"##################################################################################
let g:gist_detect_filetype = 1
let g:gist_open_browser_after_post = 1
let g:gist_show_privates = 1
let g:gist_post_private = 1

"##################################################################################
" VIM-CLOJURE-STATIC
"##################################################################################
" Default
let g:clojure_fuzzy_indent = 1
let g:clojure_align_multiline_strings = 1
let g:clojure_fuzzy_indent_patterns = ['^match', '^with', '^def', '^let']
let g:clojure_fuzzy_indent_blacklist = ['-fn$', '\v^with-%(meta|out-str|loading-context)$']

"##################################################################################
" RUST.VIM
"##################################################################################
"let g:rustfmt_autosave = 1 " auto run rust formatter when saving

"##################################################################################
" RAINBOW
"##################################################################################
let g:rainbow_active = 1 " Always on
let s:light_rainbow = ['red', 'green', 'magenta', 'cyan', 'yellow', 'white', 'gray', 'blue']
let s:dark_rainbow = ['darkblue', 'red', 'black', 'darkgreen', 'darkyellow', 'darkred', 'darkgray']
let s:rainbow_theme = g:campo_light_dark_mode

function! UpdateRainbowConf()
    let g:rainbow_conf = {
        \   'ctermfgs': (s:rainbow_theme == "light"? s:dark_rainbow : s:light_rainbow)
     \}
"\   'separately': {
"\       '*': 0, " Disable all
"\       'c++': {} " Only enable c++
"\   }
endfunction

call UpdateRainbowConf()

function! ReloadRainbow()
    if g:campo_theme_use_rainbow_parens
        if exists(':RainbowToggle')
            call UpdateRainbowConf()
            call rainbow#clear() | call rainbow#hook()
        endif
    else
        let g:rainbow_active = 0
        if exists(':RainbowToggle')
            call UpdateRainbowConf()
            call rainbow#clear()
        endif
    endif
endfunction


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #6 VISUALS (COLORS, HIGHLIGHTING)
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||


"###########################################################################
" COLORS
"###########################################################################

exec "autocmd ColorScheme " . g:campo_dark_theme . " call ReloadRainbow()"
exec "autocmd ColorScheme " . g:campo_light_theme . " call ReloadRainbow()"

" Toggle between light and dark themes.
noremap <leader>l :call ToggleLightDarkTheme()<cr>

let s:current_light_dark_mode = g:campo_light_dark_mode

function! ToggleLightDarkTheme()
    if s:current_light_dark_mode == 'light'
        call ChangeLightDarkMode('dark', 0)
    else
        call ChangeLightDarkMode('light', 0)
    endif
endfunction

function! ChangeLightDarkMode(mode, onlySetTheme)
    if a:mode == 'light'
        let s:rainbow_theme = 'light'
        let s:theme = g:campo_light_theme
        exe 'colorscheme ' . s:theme
        set background=light
    else
        let s:rainbow_theme = 'dark'
        let s:theme = g:campo_dark_theme
        " We have to set the theme twice in order to get its correct dark-theme colors.
        " Weird stuff.
        exe 'colorscheme ' . s:theme
        set background=dark
        exe 'colorscheme ' . s:theme
    endif

    let s:current_light_dark_mode = a:mode

    if !a:onlySetTheme
        exec 'AirlineTheme' a:mode
    endif
endfunction

" Set the intial light/dark mode.
if g:campo_light_dark_mode =~ 'light'
    call ChangeLightDarkMode('light', 1)
else
    call ChangeLightDarkMode('dark', 1)
endif

" Open the current color scheme for editing.
function! EditColorScheme()
    let l:path = g:vim_dir . '/colors/' . s:theme . '.vim'
    if filereadable(l:path)
        execute 'vsplit ' . l:path
    else
        call PrintError("Failed to open " . l:path . " for editing.")
    endif
endfunction

command -nargs=0 EditColorScheme call EditColorScheme()

"##################################################################################
" HIGHLIGHTS - TODO, NOTE, FIXME, etc
"##################################################################################

" NOTE: These depend on custom color names (Bugs, Notes and Notices) defined
" in the campo color themes. Since most themes won't define these, you can
" use WildMenu as substitution.
"
" FIXME: the custom Bugs, Notes and Notices highlighting for campo-light isn't
" working...

augroup vimrc_bugs
    autocmd!
    autocmd Syntax * syn match MyBugs /\v<(FIXME|BUG|DEPRECATED):/
          \ containedin=.*Comment,vimCommentTitle
augroup END
hi def link MyBugs Bugs

augroup vimrc_notes
    autocmd!
    autocmd Syntax * syn match MyNotes /\v<(IDEA|NOTE|QUESTION|WARNING|IMPORTANT):/
          \ containedin=.*Comment,vimCommentTitle
augroup END
hi def link MyNotes Notes

augroup vimrc_notices
    autocmd!
    autocmd Syntax * syn match MyNotices /\v<(WARNING|IMPORTANT):/
          \ containedin=.*Comment,vimCommentTitle
augroup END
hi def link MyNotices Notices

augroup vimrc_annotated_todo
    autocmd!
    " This was a major pain in the ass to get working...
    autocmd Syntax * syn match cTodo /@\S\+/
          \ containedin=.*Comment,vimCommentTitle
augroup END

augroup vimrc_annotated_notes
    autocmd!
    autocmd Syntax * syn match cTodo /#\+ .\+$/
          \ containedin=.*Comment,vimCommentTitle
augroup END


"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
" #7 CUSTOM FUNCTIONS & COMMANDS
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||


"##################################################################################
" COMPILING CODE
"##################################################################################

" AsyncRun status line
let g:airline_section_error = airline#section#create_right(['%{g:asyncrun_status}'])

" "make" value is needed for asyncrun to work with the errormarker plugin
" https://github.com/skywind3000/asyncrun.vim/wiki/FAQ#can-asyncrunvim-trigger-an-autocommand-quickfixcmdpost-to-get-some-plugin-like-errormaker-processing-the-content-in-quickfix-
let g:asyncrun_auto = "make"

" Error and warning gutter characters.
let errormarker_errortext = "E"
let errormarker_warningtext = "W"
let errormarker_infotext = "I"

" Gutter character colors. See color file for the group definition.
let errormarker_errortextgroup = "BuildError"
let errormarker_warningtextgroup = "BuildWarn"
let errormarker_infotextgroup = "BuildInfo"

" Colors for the marked lines. See color file for the group definition.
let errormarker_errorgroup = "BuildError"
let errormarker_warninggroup = "BuildWarn"
let errormarker_infogroup = "BuildInfo"

" I don't know how to map to a plugin command, so I'm wrapping it with a function...ugh.
function! ShowErrorAtCursor()
    " This is defined in errormarker.vim
    ErrorAtCursor
endfunction
nnoremap <leader>ce :call ShowErrorAtCursor()<cr>

"/////////////////////////////////////////////////
" CUSTOM ERROR FORMATS
"/////////////////////////////////////////////////

" @note: You can debug the error parsing by running :ShowErrorEntries
" This will print the valid entries. You'll know parsing is correct when the
" entries have a type, line num, error message, etc.

function! ShowErrorEntries()
    " Prints out valid quickfix errors.
    redraw!
    for l:d in getqflist()
        if l:d.valid == 1
            echomsg l:d
        endif
    endfor
endfunction
command -nargs=0 ShowErrorEntries call ShowErrorEntries()

" Jai
"
" Z:\path\main.jai:100,10: Error: Undeclared identifier 's1'.
set errorformat=\\\ %#%f:%l\\,%c:\ %t%[A-z]%#:\ %m


" Microsoft compiler: cl.exe
"
" Z:\path\main.cpp(2808): error C2220: the following warning is treated as an error
set errorformat+=\\\ %#%f(%l):\ %#%t%[A-z]%#\ %[A-z]%#%n:\ %m


" Microsoft MSBuild errors
"
" @note I got this off the Internet and haven't tested it yet.
"
" Z:\path\main.cpp(2808): error C2220: the following warning is treated as an error
set errorformat+=\\\ %#%f(%l\\,%c):\ %m


" Microsoft HLSL compiler: fxc.exe
"
" @note I got this off the Internet and haven't tested it yet.
" @todo Add an example
set errorformat+=\\\ %#%f(%l\\\,%c-%*[0-9]):\ %#%t%[A-z]%#\ %m


"/////////////////////////////////////////////////
" BUILD FUNCTIONS
"/////////////////////////////////////////////////

function! HideBuildResultsAndClearErrors()
    RemoveErrorMarkers
    call asyncrun#quickfix_toggle(g:quickfix_pane_height, 0)
endfunction

function! HideAsyncResults()
    call asyncrun#quickfix_toggle(g:quickfix_pane_height, 0)
endfunction

function! ToggleBuildResults()
    call asyncrun#quickfix_toggle(g:quickfix_pane_height)
endfunction

function! StopRunTask()
    AsyncStop
    call HideAsyncResults()
endfunction

function! Build(optimized=0, silent=0)
    let l:async_cmd = "AsyncRun! "
    if a:silent
        let l:async_cmd .= "-post=call\\ HideAsyncResults() "
    endif

    let l:is_jai = 0
    let l:cmd = ""

    let l:ext = tolower(expand('%:e'))
    let l:current_dir = expand('%:h')
    let l:parent_dir  = expand('%:p:h')

    " Check if this is a jai module with a build.jai one directory back. This
    " only works when the file is directly inside the modules folder.
    let l:jai_module_with_build = (tolower(l:current_dir) == "modules") && filereadable(l:current_dir . "/../build.jai")

    if (l:jai_module_with_build == 1) || filereadable(l:parent_dir . "/build.jai")
         " Jai build file
        let l:is_jai = 1
        let l:cmd = "jai " . l:parent_dir . "/"

        if l:jai_module_with_build == 1
            let l:cmd .= "../build.jai"
        else
            let l:cmd .= "build.jai"
        endif

        if a:optimized == 1
            echo "Compiling release build.jai"
            " @note We pass 'release' as a user command arg for the build file
            " to parse. -release is a compiler arg and we don't want to use
            " that. Ideally the build script would ignore that completely.
            let l:cmd .= " - release"
        else
            echo "Compiling debug build.jai"
        endif

        " @note We aren't importing the local modules because the build file
        " should manage that sort of thing for us.

    elseif l:ext == "jai"
        let l:is_jai = 1
        let l:cmd = "jai % "

        if a:optimized == 1
            echo "Compiling release " . expand('%:t')
            let l:cmd .= " -release"
        else
            echo "Compiling debug " . expand('%:t')
        endif

        " If there's a local modules/ directory then we'll import it.
        if isdirectory(l:parent_dir . "/modules")
            let l:cmd .= " -import_dir modules"
        endif

    else
        let l:cmd .= './build* '
        if a:optimized == 1
            let l:cmd .= ' -o'
        endif
    endif

    if l:is_jai
        let l:cmd .= ' '.g:campo_jai_build_args
    endif

    " I was originally passing -save=2 to AsyncRun! in order to save all
    " modified files (it just does a `silent! wall` call), but I want ctags to
    " be generated so we're handling the save ourselves.
    call WriteAllModifiedFilesAndCreateCtags()
    exec l:async_cmd . l:cmd
endfunction

function! RunProgram()
    if filereadable("run")
        exec "AsyncRun! -post=call\\ StopRunTask() ./run %"
    else
        let l:ext = tolower(expand('%:e'))
        if l:ext == "jai"
            if filereadable(expand('%:p:r') . '.exe')
                exec "AsyncRun! " . expand('%:p:r') . ".exe"
            else
                if tolower(expand('%:h')) == "modules"
                    " This is likely a jai module inside a project. Check for an " exe one directory back.
                    let l:files = systemlist('ls ' . expand('%:p:h') . '/../*.exe 2>/dev/null')
                else
                    let l:files = systemlist('ls ' . expand('%:p:h') . '/*.exe 2>/dev/null')
                endif

                if len(l:files) > 0
                    exec "AsyncRun! " . l:files[0]
                else
                    call PrintError("No exe found. Compile first?")
                endif
            endif
        elseif l:ext == "py"
            exec "AsyncRun! python %"
        endif
    endif
endfunction

" Show results window the moment the async job starts
augroup asyncPluginCmds
    autocmd!
    autocmd User AsyncRunStart call asyncrun#quickfix_toggle(g:quickfix_pane_height, 1)
augroup END

" Toggle build results
nnoremap <leader>bc :call ToggleBuildResults()<cr>
noremap <F11> :call ToggleBuildResults()<cr>
" Hide build results and clear errors
noremap <F10> :call HideBuildResultsAndClearErrors()<cr>

" Execute build script and keep results.
nnoremap <silent><leader>b :call Build(0)<cr>
" Execute build and hide results.
nnoremap <silent><F8> :call Build(0, 1)<cr>

" Execute optimized build script
nnoremap <leader>bb :call Build(1)<cr>

" Execute run script
nnoremap <silent><leader>br :call RunProgram()<cr>
nnoremap <silent><F9> :call RunProgram()<cr>

nnoremap <leader>bs :AsyncStop<cr>

"Go to next build error
nnoremap <F7> :cn<CR>
nnoremap <C-n> :cn<CR>

"Go to previous build error
nnoremap <F6> :cp<CR>
nnoremap <C-p> :cp<CR>


"##################################################################################
" TEXT SEARCH
"##################################################################################

" Search using ripgrep (first install with Rust: cargo install ripgrep).
function! Search(path, search_args, case_insensitive=0)
    let l:helper = "Search '" . a:path . "' (" . (len(a:search_args) > 0 ? a:search_args . " | " : '') . (a:case_insensitive ?  "INSENSITIVE" : "SENSITIVE") . "): "
    let l:term = input(l:helper)
    if empty(l:term)
        return
    endif

    " @note --pretty (i.e. colors) is not enabled in vim-ripgrep because the
    " quickfix window doesn't seem to parse the ansi color codes.
    let l:rg_args = "--column --line-number --no-heading --fixed-strings --no-ignore --hidden --follow --trim -g \"!tags\" -g \"!.git/\" -g \"!AppData/\" " . a:search_args

    if a:case_insensitive
        let l:rg_args .= " --ignore-case"
    endif

    " Some characters need to be escaped.
    let l:escaped_term = substitute(l:term, '[#%]', '\\\\\\&', 'g')

    let l:format = 'Rg ' . l:rg_args . ' ' . a:path . ' -e %s'
    let l:cmd = printf(l:format, shellescape(l:escaped_term))
    exec l:cmd
endfunction

"/////////////////////////////////////////////////
" SEARCH IN CURRENT DIRECTORY
"/////////////////////////////////////////////////

" Case insensitive:
noremap <leader>s  :call Search('.', g:campo_custom_search_args, 1)<cr>
" Case sensitive:
noremap <leader>ss  :call Search('.', g:campo_custom_search_args)<cr>

"/////////////////////////////////////////////////
" SEARCH IN DIRECTORY CONTAINING THE ACTIVE FILE
"/////////////////////////////////////////////////

" Case insensitive:
noremap <leader>sf  :call Search(expand('%:p:h'), g:campo_custom_search_args, 1)<cr>
" Case sensitive:
noremap <leader>ssf :call Search(expand('%:p:h'), g:campo_custom_search_args)<cr>

"/////////////////////////////////////////////////
" SEARCH IN JAI FOLDERS
"/////////////////////////////////////////////////

" Case insensitive:
noremap <leader>sg :call Search(g:campo_jai_path, g:campo_custom_search_args, 1)<cr>
noremap <leader>sm :call Search(g:campo_jai_path . '/modules', g:campo_custom_search_args, 1)<cr>
noremap <leader>sh :call Search(g:campo_jai_path . '/how_to', g:campo_custom_search_args, 1)<cr>
noremap <leader>se :call Search(g:campo_jai_path . '/examples', g:campo_custom_search_args, 1)<cr>
" Case sensitive:
noremap <leader>ssg :call Search(g:campo_jai_path, g:campo_custom_search_args)<cr>
noremap <leader>ssm :call Search(g:campo_jai_path . '/modules', g:campo_custom_search_args)<cr>
noremap <leader>ssh :call Search(g:campo_jai_path . '/how_to', g:campo_custom_search_args)<cr>
noremap <leader>sse :call Search(g:campo_jai_path . '/examples', g:campo_custom_search_args)<cr>

" Navigation for the vim-ripgrep search results.
" Hit o on a result line to open the file at that line.
" Hit p on a result line to open the file at that line and return to the results pane.
nnoremap <expr> o (&buftype is# "quickfix" ? "<CR>\|:lopen<CR>" : "o")
nnoremap <expr> p (&buftype is# "quickfix" ? "<CR>\|:copen<CR>" : "p")


"##################################################################################
" TEXT SEARCH & REPLACE
"##################################################################################

" @warning I've stopped using this because it sometimes locks up vim and I
" have to force exit the process then clean up the swap files.
" @improve Figure out what's causing vim to freeze and fix it. Seems to happen
" when it quickly changes and saves a handful of buffers.

" Replace text in a git repo's committed files.
" The range identifier allows us to run this once when multiple lines are selected in a file.
function! GlobalReplaceIt(confirm_replacement) range
    if exists(':Ggrep')
        call inputsave()
        if a:confirm_replacement
            let l:term = input('Enter search term (w/ confirmation): ')
        else
            let l:term = input('Enter search term (no confirmation): ')
        endif
        call inputrestore()

        if empty(l:term)
            return
        endif

        call inputsave()
        let l:replacement = input('Enter replacement: ')
        call inputrestore()
        if empty(l:replacement)
            return
        endif

        if a:confirm_replacement
            let l:confirm = 'c'
        else
            let l:confirm = 'e'
        endif

        " Capture opened buffers and windows so that we can restore everything after running cdo.
        exec 'mksession! _replace_session.vim'

        " Search all committed files in the current directory
        "  Ignoring binary files (-I)
        "  Only including a matching filename once (--name-only)
        exec 'Ggrep --threads 4 -I --name-only' l:term '.'

        " cdo will run the command foreach file in the grep results. It opens
        " the file in a window so we immediately write the changes and then
        " wipe the buffer (closing the window). If we don't close it then vim
        " will run out of space when modifying a lot of files. This will
        " likely close buffers that were open before running the replace, but
        " we will restore them below from the saved session file.
        " Note that we don't run autocommands for optimization purposes!
        :noautocmd exec 'cdo' '%s/'.l:term.'/'.l:replacement.'/g'.l:confirm '| write | bwipe'

        " Restore the session.
        if filereadable('_replace_session.vim')
            silent! exec 'source _replace_session.vim | !rm _replace_session.vim &>/dev/null'
        endif

        call CreateCtags()
    else
        call PrintError("Unable to search since you're not in a git repo!")
    endif
endfunction
noremap <leader>r :call GlobalReplaceIt(0)<cr>
noremap <leader>rr :call GlobalReplaceIt(1)<cr>


"##################################################################################
" RENAME CURRENT FILE
"##################################################################################

function! RenameFile()
    let l:old_name = expand('%')
    let l:new_name = input('New file name: ', expand('%'), 'file')
    if l:new_name != '' && l:new_name != l:old_name
        let l:confirm = confirm("Rename ".l:old_name." to ".l:new_name."?", "&Yes\n&No")
        if l:confirm == 1
            exec 'saveas' l:new_name
            exec 'silent! !rm' l:old_name
            redraw!
        endif
    endif
endfunction
noremap <leader>n :call RenameFile()<cr>


"##################################################################################
" CENTER THE BUFFER
"##################################################################################

function! CenterPane()
    " Centers the current pane as the middle 2 of 4 imaginary columns should
    " be called in a window with a single pane.
    " Taken from https://dev.to/vinneycavallo/easily-center-content-in-vim
    lefta vnew
    wincmd w
    exec 'vertical resize' string(&columns * 0.65)
endfunction

function! RemoveCenterPane()
    wincmd w
    close
endfunction

nnoremap <leader>cc :call CenterPane()<cr>
nnoremap <leader>cd :call RemoveCenterPane()<cr>


"##################################################################################
" SIMPLE VIEW
"##################################################################################

" Applies a clean view of the current buffer by turning off line
" numbers, trailing spaces, tabs and git diff markers in the gutter.

function! ToggleSimpleView()
    " I wasn't able to get this to apply to every copy of the same buffer,
    " e.g. you have a split view showing the same file; only the active one
    " will be affected, but they will share the same state!  I tried many
    " different approaches (bufdo, looping over windows and buffers) and
    " nothing worked. I looked at the gitgutter plugin since it supports
    " toggling a buffer and it correctly modifies all instances, but the code
    " is complex and there's so much just to do a simple thing. Fuck it. It's
    " not worth the hassle and the inevitable hair pulling that I always
    " experience when trying to do non-trivial things with this garbage
    " scripting language.
    if ! exists("b:simple_view_enabled")
        let b:simple_view_enabled = 0
    endif

    if b:simple_view_enabled == 0
        let b:simple_view_enabled = 1
        setlocal nonumber
        setlocal nolist
        exec 'GitGutterBufferDisable'
    else
        let b:simple_view_enabled = 0
        setlocal number
        setlocal list
        exec 'GitGutterBufferEnable'
    endif
endfunction

nnoremap <leader>c :call ToggleSimpleView()<cr>

"-----------------------------------------------------------------------------------------------------------------------

let g:campo_vimrc_initialized = 1