Relocate arch config

linux/arch/config/compton.conf

@@ -0,0 +1,4 @@
+# Shadow
+shadow = true;
+no-dnd-shadow = true;
+no-dock-shadow = true;

linux/arch/config/ctags

@@ -0,0 +1,10 @@
+--recurse=yes
+--exclude=.git
+--exclude=vendor/*
+--exclude=node_modules/*
+--exclude=db/*
+--exclude=log/*
+--exclude=personal/*
+--exclude=public/*
+--exclude=resources/public/*
+--exclude=target/*

linux/arch/config/gnupg/gpg.conf

@@ -0,0 +1,136 @@
+# Options for GnuPG
+# Copyright 1998-2003, 2010 Free Software Foundation, Inc.
+# Copyright 1998-2003, 2010 Werner Koch
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This file is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Unless you specify which option file to use (with the command line
+# option "--options filename"), GnuPG uses the file ~/.gnupg/gpg.conf
+# by default.
+#
+# An options file can contain any long options which are available in
+# GnuPG. If the first non white space character of a line is a '#',
+# this line is ignored.  Empty lines are also ignored.
+#
+# See the gpg man page for a list of options.
+
+
+# If you have more than 1 secret key in your keyring, you may want to
+# uncomment the following option and set your preferred keyid.
+
+#default-key 621CC013
+
+
+# If you do not pass a recipient to gpg, it will ask for one.  Using
+# this option you can encrypt to a default key.  Key validation will
+# not be done in this case.  The second form uses the default key as
+# default recipient.
+
+#default-recipient some-user-id
+#default-recipient-self
+
+
+# Group names may be defined like this:
+#   group mynames = paige 0x12345678 joe patti
+#
+# Any time "mynames" is a recipient (-r or --recipient), it will be
+# expanded to the names "paige", "joe", and "patti", and the key ID
+# "0x12345678".  Note there is only one level of expansion - you
+# cannot make an group that points to another group.  Note also that
+# if there are spaces in the recipient name, this will appear as two
+# recipients.  In these cases it is better to use the key ID.
+
+#group mynames = paige 0x12345678 joe patti
+
+
+# GnuPG can automatically locate and retrieve keys as needed using
+# this option.  This happens when encrypting to an email address (in
+# the "user@@example.com" form) and there are no keys matching
+# "user@example.com" in the local keyring.  This option takes any
+# number mechanisms which are tried in the given order.  The default
+# is "--auto-key-locate local" to search for keys only in the local
+# key database.  Uncomment the next line to locate a missing key using
+# two DNS based mechanisms.
+
+#auto-key-locate local,pka,dane
+
+
+# Common options for keyserver functions:
+# (Note that the --keyserver option has been moved to dirmngr.conf)
+#
+# include-disabled = when searching, include keys marked as "disabled"
+#                    on the keyserver (not all keyservers support this).
+#
+# no-include-revoked = when searching, do not include keys marked as
+#                      "revoked" on the keyserver.
+#
+# verbose = show more information as the keys are fetched.
+#           Can be used more than once to increase the amount
+#           of information shown.
+#
+# auto-key-retrieve = automatically fetch keys as needed from the keyserver
+#                     when verifying signatures or when importing keys that
+#                     have been revoked by a revocation key that is not
+#                     present on the keyring.
+#
+# no-include-attributes = do not include attribute IDs (aka "photo IDs")
+#                         when sending keys to the keyserver.
+
+#keyserver-options auto-key-retrieve
+
+
+# Uncomment this line to display photo user IDs in key listings and
+# when a signature from a key with a photo is verified.
+
+#show-photos
+
+
+# Use this program to display photo user IDs
+#
+# %i is expanded to a temporary file that contains the photo.
+# %I is the same as %i, but the file isn't deleted afterwards by GnuPG.
+# %k is expanded to the key ID of the key.
+# %K is expanded to the long OpenPGP key ID of the key.
+# %t is expanded to the extension of the image (e.g. "jpg").
+# %T is expanded to the MIME type of the image (e.g. "image/jpeg").
+# %f is expanded to the fingerprint of the key.
+# %% is %, of course.
+#
+# If %i or %I are not present, then the photo is supplied to the
+# viewer on standard input.  If your platform supports it, standard
+# input is the best way to do this as it avoids the time and effort in
+# generating and then cleaning up a secure temp file.
+#
+# The default program is "xloadimage -fork -quiet -title 'KeyID 0x%k' stdin"
+# On Mac OS X and Windows, the default is to use your regular JPEG image
+# viewer.
+#
+# Some other viewers:
+# photo-viewer "qiv %i"
+# photo-viewer "ee %i"
+# photo-viewer "display -title 'KeyID 0x%k'"
+#
+# This one saves a copy of the photo ID in your home directory:
+# photo-viewer "cat > ~/photoid-for-key-%k.%t"
+#
+# Use your MIME handler to view photos:
+# photo-viewer "metamail -q -d -b -c %T -s 'KeyID 0x%k' -f GnuPG"
+
+
+# Because some mailers change lines starting with "From " to ">From "
+# it is good to handle such lines in a special way when creating
+# cleartext signatures; all other PGP versions do it this way too.
+# To enable full OpenPGP compliance you may want to use this option.
+
+#no-escape-from-lines
+
+
+# Uncomment the following option to get rid of the copyright notice
+
+#no-greeting

linux/arch/config/lxpanel/LXDE/config

@@ -0,0 +1,2 @@
+[Command]
+Logout=lxde-logout

linux/arch/config/lxpanel/LXDE/panels/panel

@@ -0,0 +1,160 @@
+# lxpanel <profile> config file. Manually editing is not recommended.
+# Use preference dialog in lxpanel to adjust config when you can.
+
+Global {
+  edge=bottom
+  allign=left
+  margin=0
+  widthtype=percent
+  width=100
+  height=26
+  transparent=0
+  tintcolor=#000000
+  alpha=0
+  setdocktype=1
+  setpartialstrut=1
+  usefontcolor=1
+  fontcolor=#ffffff
+  background=1
+  backgroundfile=/usr/share/lxpanel/images/background.png
+}
+Plugin {
+  type=space
+  Config {
+    Size=2
+  }
+}
+Plugin {
+  type=menu
+  Config {
+    image=/usr/share/lxde/images/lxde-icon.png
+    system {
+    }
+    separator {
+    }
+    item {
+      command=run
+    }
+    separator {
+    }
+    item {
+      image=gnome-logout
+      command=logout
+    }
+  }
+}
+Plugin {
+  type=launchbar
+  Config {
+    Button {
+      id=pcmanfm.desktop
+    }
+  }
+}
+Plugin {
+  type=space
+  Config {
+    Size=4
+  }
+}
+Plugin {
+  type=wincmd
+  Config {
+    Button1=iconify
+    Button2=shade
+  }
+}
+Plugin {
+  type=space
+  Config {
+    Size=10
+  }
+}
+Plugin {
+  type=launchbar
+  Config {
+    Button {
+      id=menu://applications/Internet/google-chrome.desktop
+    }
+    Button {
+      id=/usr/share/applications/terminator.desktop
+    }
+    Button {
+      id=/usr/share/applications/slack.desktop
+    }
+    Button {
+      id=/usr/share/applications/telegramdesktop.desktop
+    }
+    Button {
+      id=/usr/share/applications/spotify.desktop
+    }
+    Button {
+      id=menu://applications/chrome-apps/chrome-hmjkmjkepdijhoojdojkdfohbdgmmhki-Default.desktop
+    }
+    Button {
+      id=/usr/share/applications/synergy.desktop
+    }
+    Button {
+      id=menu://applications/System/lxtask.desktop
+    }
+  }
+}
+Plugin {
+  type=space
+  Config {
+    Size=4
+  }
+}
+Plugin {
+  type=taskbar
+  expand=1
+  Config {
+    tooltips=1
+    IconsOnly=0
+    AcceptSkipPager=1
+    ShowIconified=1
+    ShowMapped=1
+    ShowAllDesks=0
+    UseMouseWheel=1
+    UseUrgencyHint=1
+    FlatButton=0
+    MaxTaskWidth=150
+    spacing=1
+  }
+}
+Plugin {
+  type=netstat
+  Config {
+  }
+}
+Plugin {
+  type=cpu
+  Config {
+  }
+}
+Plugin {
+  type=tray
+  Config {
+  }
+}
+Plugin {
+  type=dclock
+  Config {
+    ClockFmt=%R:%S
+    TooltipFmt=%A %x
+    BoldFont=0
+    IconOnly=0
+    CenterText=0
+  }
+}
+Plugin {
+  type=launchbar
+  Config {
+    Button {
+      id=lxde-screenlock.desktop
+    }
+    Button {
+      id=lxde-logout.desktop
+    }
+  }
+}

linux/arch/config/lxpanel/launchtaskbar.cfg

@@ -0,0 +1,4 @@
+[special_cases]
+synaptic=synaptic-pkexec
+soffice.bin=libreoffice
+x-terminal-emulator=lxterminal

linux/arch/config/openbox/autostart

@@ -0,0 +1,4 @@
+compton &
+conky &
+numlockx &
+redshift &

linux/arch/config/openbox/lxde-rc.xml

@@ -0,0 +1,756 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Do not edit this file, it will be overwritten on install.
+        Copy the file to $HOME/.config/openbox/ instead. -->
+<openbox_config xmlns="http://openbox.org/3.4/rc">
+  <resistance>
+    <strength>10</strength>
+    <screen_edge_strength>20</screen_edge_strength>
+  </resistance>
+  <focus>
+    <focusNew>yes</focusNew>
+    <!-- always try to focus new windows when they appear. other rules do
+       apply -->
+    <followMouse>no</followMouse>
+    <!-- move focus to a window when you move the mouse into it -->
+    <focusLast>yes</focusLast>
+    <!-- focus the last used window when changing desktops, instead of the one
+       under the mouse pointer. when followMouse is enabled -->
+    <underMouse>no</underMouse>
+    <!-- move focus under the mouse, even when the mouse is not moving -->
+    <focusDelay>200</focusDelay>
+    <!-- when followMouse is enabled, the mouse must be inside the window for
+       this many milliseconds (1000 = 1 sec) before moving focus to it -->
+    <raiseOnFocus>no</raiseOnFocus>
+    <!-- when followMouse is enabled, and a window is given focus by moving the
+       mouse into it, also raise the window -->
+  </focus>
+  <placement>
+    <policy>Smart</policy>
+    <!-- 'Smart' or 'UnderMouse' -->
+    <center>yes</center>
+    <!-- whether to place windows in the center of the free area found or
+       the top left corner -->
+    <monitor>Any</monitor>
+    <!-- with Smart placement on a multi-monitor system, try to place new windows
+       on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where
+       the active window is -->
+  </placement>
+  <theme>
+    <name>Onyx</name>
+    <titleLayout>NLIMC</titleLayout>
+    <!--
+      available characters are NDSLIMC, each can occur at most once.
+      N: window icon
+      L: window label (AKA title).
+      I: iconify
+      M: maximize
+      C: close
+      S: shade (roll up/down)
+      D: omnipresent (on all desktops).
+  -->
+    <keepBorder>yes</keepBorder>
+    <animateIconify>yes</animateIconify>
+    <font place="ActiveWindow">
+      <name>sans</name>
+      <size>10</size>
+      <!-- font size in points -->
+      <weight>bold</weight>
+      <!-- 'bold' or 'normal' -->
+      <slant>normal</slant>
+      <!-- 'italic' or 'normal' -->
+    </font>
+    <font place="InactiveWindow">
+      <name>sans</name>
+      <size>10</size>
+      <!-- font size in points -->
+      <weight>bold</weight>
+      <!-- 'bold' or 'normal' -->
+      <slant>normal</slant>
+      <!-- 'italic' or 'normal' -->
+    </font>
+    <font place="MenuHeader">
+      <name>sans</name>
+      <size>10</size>
+      <!-- font size in points -->
+      <weight>normal</weight>
+      <!-- 'bold' or 'normal' -->
+      <slant>normal</slant>
+      <!-- 'italic' or 'normal' -->
+    </font>
+    <font place="MenuItem">
+      <name>sans</name>
+      <size>10</size>
+      <!-- font size in points -->
+      <weight>normal</weight>
+      <!-- 'bold' or 'normal' -->
+      <slant>normal</slant>
+      <!-- 'italic' or 'normal' -->
+    </font>
+    <font place="OnScreenDisplay">
+      <name>sans</name>
+      <size>10</size>
+      <!-- font size in points -->
+      <weight>bold</weight>
+      <!-- 'bold' or 'normal' -->
+      <slant>normal</slant>
+      <!-- 'italic' or 'normal' -->
+    </font>
+    <font place="ActiveOnScreenDisplay">
+      <name>Sans</name>
+      <size>8</size>
+      <weight/>
+      <slant/>
+    </font>
+    <font place="InactiveOnScreenDisplay">
+      <name>Sans</name>
+      <size>8</size>
+      <weight/>
+      <slant/>
+    </font>
+  </theme>
+  <desktops>
+    <!-- this stuff is only used at startup, pagers allow you to change them
+       during a session
+
+       these are default values to use when other ones are not already set
+       by other applications, or saved in your session
+
+       use obconf if you want to change these without having to log out
+       and back in -->
+    <number>2</number>
+    <firstdesk>1</firstdesk>
+    <names>
+      <!-- set names up here if you want to, like this:
+    <name>desktop 1</name>
+    <name>desktop 2</name>
+    -->
+    </names>
+    <popupTime>875</popupTime>
+    <!-- The number of milliseconds to show the popup for when switching
+       desktops.  Set this to 0 to disable the popup. -->
+  </desktops>
+  <resize>
+    <drawContents>yes</drawContents>
+    <popupShow>Nonpixel</popupShow>
+    <!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) -->
+    <popupPosition>Center</popupPosition>
+    <!-- 'Center', 'Top', or 'Fixed' -->
+    <popupFixedPosition>
+      <!-- these are used if popupPosition is set to 'Fixed' -->
+      <x>10</x>
+      <!-- positive number for distance from left edge, negative number for
+         distance from right edge, or 'Center' -->
+      <y>10</y>
+      <!-- positive number for distance from top edge, negative number for
+         distance from bottom edge, or 'Center' -->
+    </popupFixedPosition>
+  </resize>
+  <!-- You can reserve a portion of your screen where windows will not cover when
+     they are maximized, or when they are initially placed.
+     Many programs reserve space automatically, but you can use this in other
+     cases. -->
+  <margins>
+    <top>0</top>
+    <bottom>0</bottom>
+    <left>0</left>
+    <right>0</right>
+  </margins>
+  <dock>
+    <position>TopLeft</position>
+    <!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating -->
+    <floatingX>0</floatingX>
+    <floatingY>0</floatingY>
+    <noStrut>no</noStrut>
+    <stacking>Above</stacking>
+    <!-- 'Above', 'Normal', or 'Below' -->
+    <direction>Vertical</direction>
+    <!-- 'Vertical' or 'Horizontal' -->
+    <autoHide>no</autoHide>
+    <hideDelay>300</hideDelay>
+    <!-- in milliseconds (1000 = 1 second) -->
+    <showDelay>300</showDelay>
+    <!-- in milliseconds (1000 = 1 second) -->
+    <moveButton>Middle</moveButton>
+    <!-- 'Left', 'Middle', 'Right' -->
+  </dock>
+  <keyboard>
+    <chainQuitKey>C-g</chainQuitKey>
+    <!-- Keybindings for desktop switching -->
+    <keybind key="C-A-Left">
+      <action name="DesktopLeft">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="C-A-Right">
+      <action name="DesktopRight">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="C-A-Up">
+      <action name="DesktopUp">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="C-A-Down">
+      <action name="DesktopDown">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="S-A-Left">
+      <action name="SendToDesktopLeft">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="S-A-Right">
+      <action name="SendToDesktopRight">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="S-A-Up">
+      <action name="SendToDesktopUp">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="S-A-Down">
+      <action name="SendToDesktopDown">
+        <dialog>no</dialog>
+        <wrap>no</wrap>
+      </action>
+    </keybind>
+    <keybind key="W-F1">
+      <action name="Desktop">
+        <desktop>1</desktop>
+      </action>
+    </keybind>
+    <keybind key="W-F2">
+      <action name="Desktop">
+        <desktop>2</desktop>
+      </action>
+    </keybind>
+    <keybind key="W-F3">
+      <action name="Desktop">
+        <desktop>3</desktop>
+      </action>
+    </keybind>
+    <keybind key="W-F4">
+      <action name="Desktop">
+        <desktop>4</desktop>
+      </action>
+    </keybind>
+    <keybind key="W-d">
+      <action name="ToggleShowDesktop"/>
+    </keybind>
+    <keybind key="C-A-d">
+      <action name="ToggleShowDesktop"/>
+    </keybind>
+    <!-- Keybindings for windows -->
+    <keybind key="A-F4">
+      <action name="Close"/>
+    </keybind>
+    <keybind key="A-Escape">
+      <action name="Lower"/>
+      <action name="FocusToBottom"/>
+      <action name="Unfocus"/>
+    </keybind>
+    <keybind key="A-space">
+      <action name="ShowMenu">
+        <menu>client-menu</menu>
+      </action>
+    </keybind>
+    <!-- Keybindings for window switching -->
+    <keybind key="A-Tab">
+      <action name="NextWindow"/>
+    </keybind>
+    <keybind key="A-S-Tab">
+      <action name="PreviousWindow"/>
+    </keybind>
+    <keybind key="C-A-Tab">
+      <action name="NextWindow">
+        <panels>yes</panels>
+        <desktop>yes</desktop>
+      </action>
+    </keybind>
+    <!-- Keybindings for running applications -->
+    <keybind key="W-e">
+      <action name="Execute">
+        <startupnotify>
+          <enabled>true</enabled>
+          <name>PCManFM</name>
+        </startupnotify>
+        <command>pcmanfm</command>
+      </action>
+    </keybind>
+    <!--keybindings for LXPanel -->
+    <keybind key="W-r">
+      <action name="Execute">
+        <command>lxpanelctl run</command>
+      </action>
+    </keybind>
+    <keybind key="A-F2">
+      <action name="Execute">
+        <command>lxpanelctl run</command>
+      </action>
+    </keybind>
+    <keybind key="C-Escape">
+      <action name="Execute">
+        <command>lxpanelctl menu</command>
+      </action>
+    </keybind>
+    <keybind key="A-F1">
+      <action name="Execute">
+        <command>lxpanelctl menu</command>
+      </action>
+    </keybind>
+    <keybind key="A-F11">
+      <action name="ToggleFullscreen"/>
+    </keybind>
+    <!-- Launch Task Manager with Ctrl+Alt+Del -->
+    <keybind key="A-C-Delete">
+      <action name="Execute">
+        <command>lxtask</command>
+      </action>
+    </keybind>
+    <!-- Launch gnome-screenshot when PrintScreen is pressed -->
+    <keybind key="Print">
+      <action name="Execute">
+        <command>gnome-screenshot -i</command>
+      </action>
+    </keybind>
+    <!-- Launch LXRandR when Fn+Screen is pressed -->
+    <keybind key="XF86Display">
+      <action name="Execute">
+        <command>lxrandr</command>
+      </action>
+    </keybind>
+  </keyboard>
+  <mouse>
+    <dragThreshold>8</dragThreshold>
+    <!-- number of pixels the mouse must move before a drag begins -->
+    <doubleClickTime>200</doubleClickTime>
+    <!-- in milliseconds (1000 = 1 second) -->
+    <screenEdgeWarpTime>400</screenEdgeWarpTime>
+    <!-- Time before changing desktops when the pointer touches the edge of the
+       screen while moving a window, in milliseconds (1000 = 1 second).
+       Set this to 0 to disable warping -->
+    <context name="Frame">
+      <mousebind button="A-Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="A-Left" action="Click">
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="A-Left" action="Drag">
+        <action name="Move"/>
+      </mousebind>
+      <mousebind button="A-Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="A-Right" action="Drag">
+        <action name="Resize"/>
+      </mousebind>
+      <mousebind button="A-Middle" action="Press">
+        <action name="Lower"/>
+        <action name="FocusToBottom"/>
+        <action name="Unfocus"/>
+      </mousebind>
+      <mousebind button="A-Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="A-Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+      <mousebind button="C-A-Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="C-A-Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+      <mousebind button="A-S-Up" action="Click">
+        <action name="SendToDesktopPrevious"/>
+      </mousebind>
+      <mousebind button="A-S-Down" action="Click">
+        <action name="SendToDesktopNext"/>
+      </mousebind>
+    </context>
+    <context name="Titlebar">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Move"/>
+      </mousebind>
+      <mousebind button="Left" action="DoubleClick">
+        <action name="ToggleMaximizeFull"/>
+      </mousebind>
+      <mousebind button="Middle" action="Press">
+        <action name="Lower"/>
+        <action name="FocusToBottom"/>
+        <action name="Unfocus"/>
+      </mousebind>
+      <mousebind button="Up" action="Click">
+        <action name="Shade"/>
+        <action name="FocusToBottom"/>
+        <action name="Unfocus"/>
+        <action name="Lower"/>
+      </mousebind>
+      <mousebind button="Down" action="Click">
+        <action name="Unshade"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="ShowMenu">
+          <menu>client-menu</menu>
+        </action>
+      </mousebind>
+    </context>
+    <context name="Top">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize">
+          <edge>top</edge>
+        </action>
+      </mousebind>
+    </context>
+    <context name="Left">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize">
+          <edge>left</edge>
+        </action>
+      </mousebind>
+    </context>
+    <context name="Right">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize">
+          <edge>right</edge>
+        </action>
+      </mousebind>
+    </context>
+    <context name="Bottom">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize">
+          <edge>bottom</edge>
+        </action>
+      </mousebind>
+      <mousebind button="Middle" action="Press">
+        <action name="Lower"/>
+        <action name="FocusToBottom"/>
+        <action name="Unfocus"/>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="ShowMenu">
+          <menu>client-menu</menu>
+        </action>
+      </mousebind>
+    </context>
+    <context name="BLCorner">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize"/>
+      </mousebind>
+    </context>
+    <context name="BRCorner">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize"/>
+      </mousebind>
+    </context>
+    <context name="TLCorner">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize"/>
+      </mousebind>
+    </context>
+    <context name="TRCorner">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Left" action="Drag">
+        <action name="Resize"/>
+      </mousebind>
+    </context>
+    <context name="Client">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Middle" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+    </context>
+    <context name="Icon">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+        <action name="ShowMenu">
+          <menu>client-menu</menu>
+        </action>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="ShowMenu">
+          <menu>client-menu</menu>
+        </action>
+      </mousebind>
+    </context>
+    <context name="AllDesktops">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Left" action="Click">
+        <action name="ToggleOmnipresent"/>
+      </mousebind>
+    </context>
+    <context name="Shade">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Click">
+        <action name="ToggleShade"/>
+      </mousebind>
+    </context>
+    <context name="Iconify">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Left" action="Click">
+        <action name="Iconify"/>
+      </mousebind>
+    </context>
+    <context name="Maximize">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Middle" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Left" action="Click">
+        <action name="ToggleMaximizeFull"/>
+      </mousebind>
+      <mousebind button="Middle" action="Click">
+        <action name="ToggleMaximizeVert"/>
+      </mousebind>
+      <mousebind button="Right" action="Click">
+        <action name="ToggleMaximizeHorz"/>
+      </mousebind>
+    </context>
+    <context name="Close">
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+        <action name="Unshade"/>
+      </mousebind>
+      <mousebind button="Left" action="Click">
+        <action name="Close"/>
+      </mousebind>
+    </context>
+    <context name="Desktop">
+      <mousebind button="Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+      <mousebind button="A-Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="A-Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+      <mousebind button="C-A-Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="C-A-Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+      <mousebind button="Left" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="Focus"/>
+        <action name="Raise"/>
+      </mousebind>
+    </context>
+    <context name="Root">
+      <!-- Menus -->
+      <mousebind button="Middle" action="Press">
+        <action name="ShowMenu">
+          <menu>client-list-combined-menu</menu>
+        </action>
+      </mousebind>
+      <mousebind button="Right" action="Press">
+        <action name="ShowMenu">
+          <menu>root-menu</menu>
+        </action>
+      </mousebind>
+    </context>
+    <context name="MoveResize">
+      <mousebind button="Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+      <mousebind button="A-Up" action="Click">
+        <action name="DesktopPrevious"/>
+      </mousebind>
+      <mousebind button="A-Down" action="Click">
+        <action name="DesktopNext"/>
+      </mousebind>
+    </context>
+  </mouse>
+  <menu>
+    <!-- You can specify more than one menu file in here and they are all loaded,
+       just don't make menu ids clash or, well, it'll be kind of pointless -->
+    <!-- default menu file (or custom one in $HOME/.config/openbox/) -->
+    <file>/usr/share/lxde/openbox/menu.xml</file>
+    <hideDelay>200</hideDelay>
+    <!-- if a press-release lasts longer than this setting (in milliseconds), the
+       menu is hidden again -->
+    <middle>no</middle>
+    <!-- center submenus vertically about the parent entry -->
+    <submenuShowDelay>100</submenuShowDelay>
+    <!-- this one is easy, time to delay before showing a submenu after hovering
+       over the parent entry -->
+    <applicationIcons>yes</applicationIcons>
+    <!-- controls if icons appear in the client-list-(combined-)menu -->
+    <manageDesktops>yes</manageDesktops>
+    <!-- show the manage desktops section in the client-list-(combined-)menu -->
+  </menu>
+  <applications>
+    <!--
+  # this is an example with comments through out. use these to make your
+  # own rules, but without the comments of course.
+
+  <application name="first element of window's WM_CLASS property (see xprop)"
+              class="second element of window's WM_CLASS property (see xprop)"
+               role="the window's WM_WINDOW_ROLE property (see xprop)">
+  # the name or the class can be set, or both. this is used to match
+  # windows when they appear. role can optionally be set as well, to
+  # further restrict your matches.
+
+  # the name, class, and role use simple wildcard matching such as those
+  # used by a shell. you can use * to match any characters and ? to match
+  # any single character.
+
+  # when multiple rules match a window, they will all be applied, in the
+  # order that they appear in this list
+
+
+    # each element can be left out or set to 'default' to specify to not
+    # change that attribute of the window
+
+    <decor>yes</decor>
+    # enable or disable window decorations
+
+    <shade>no</shade>
+    # make the window shaded when it appears, or not
+
+    <position>
+      # the position is only used if both an x and y coordinate are provided
+      # (and not set to 'default')
+      <x>center</x>
+      # a number like 50, or 'center' to center on screen. use a negative number
+      # to start from the right (or bottom for <y>), ie -50 is 50 pixels from the
+      # right edge (or bottom).
+      <y>200</y>
+      <monitor>1</monitor>
+      # specifies the monitor in a xinerama setup.
+      # 1 is the first head, or 'mouse' for wherever the mouse is
+    </position>
+
+    <focus>yes</focus>
+    # if the window should try be given focus when it appears. if this is set
+    # to yes it doesn't guarantee the window will be given focus. some
+    # restrictions may apply, but Openbox will try to
+
+    <desktop>1</desktop>
+    # 1 is the first desktop, 'all' for all desktops
+
+    <layer>normal</layer>
+    # 'above', 'normal', or 'below'
+
+    <iconic>no</iconic>
+    # make the window iconified when it appears, or not
+
+    <skip_pager>no</skip_pager>
+    # asks to not be shown in pagers
+
+    <skip_taskbar>no</skip_taskbar>
+    # asks to not be shown in taskbars. window cycling actions will also
+    # skip past such windows
+
+    <fullscreen>yes</fullscreen>
+    # make the window in fullscreen mode when it appears
+
+    <maximized>true</maximized>
+    # 'Horizontal', 'Vertical' or boolean (yes/no)
+  </application>
+
+  # end of the example
+-->
+  </applications>
+</openbox_config>

linux/arch/config/openbox/rc.xml

@@ -0,0 +1,9 @@
+<keybind key="W-x">
+ <action name="Execute">
+  <startupnotify>
+   <enabled>true</enabled>
+    <name>oblogut</name>
+  </startupnotify>
+  <command>oblogout</command>
+ </action>
+</keybind>

linux/arch/config/pacman/makepkg.conf

@@ -0,0 +1,3 @@
+# Compile in tmpfs
+BUILDDIR=/tmp/makepkg
+PKGDEST=~/.packages

linux/arch/config/postgresql.conf

@@ -0,0 +1,630 @@
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                TB = terabytes                     h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+#data_directory = 'ConfigDir'		# use data in another directory
+					# (change requires restart)
+#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
+					# (change requires restart)
+#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
+					# (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+#external_pid_file = ''			# write an extra PID file
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+#listen_addresses = 'localhost'		# what IP address(es) to listen on;
+					# comma-separated list of addresses;
+					# defaults to 'localhost'; use '*' for all
+					# (change requires restart)
+#port = 5432				# (change requires restart)
+max_connections = 100			# (change requires restart)
+# Note:  Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3	# (change requires restart)
+#unix_socket_directories = '/run/postgresql'	# comma-separated list of directories
+					# (change requires restart)
+#unix_socket_group = ''			# (change requires restart)
+#unix_socket_permissions = 0777		# begin with 0 to use octal notation
+					# (change requires restart)
+#bonjour = off				# advertise server via Bonjour
+					# (change requires restart)
+#bonjour_name = ''			# defaults to the computer name
+					# (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min		# 1s-600s
+#ssl = off				# (change requires restart)
+#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+					# (change requires restart)
+#ssl_prefer_server_ciphers = on		# (change requires restart)
+#ssl_ecdh_curve = 'prime256v1'		# (change requires restart)
+#ssl_cert_file = 'server.crt'		# (change requires restart)
+#ssl_key_file = 'server.key'		# (change requires restart)
+#ssl_ca_file = ''			# (change requires restart)
+#ssl_crl_file = ''			# (change requires restart)
+#password_encryption = on
+#db_user_namespace = off
+#row_security = on
+
+# GSSAPI using Kerberos
+#krb_server_keyfile = ''
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_count = 0		# TCP_KEEPCNT;
+					# 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 128MB			# min 128kB
+					# (change requires restart)
+#huge_pages = try			# on, off, or try
+					# (change requires restart)
+#temp_buffers = 8MB			# min 800kB
+#max_prepared_transactions = 0		# zero disables the feature
+					# (change requires restart)
+# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+#work_mem = 4MB				# min 64kB
+#maintenance_work_mem = 64MB		# min 1MB
+#autovacuum_work_mem = -1		# min 1MB, or -1 to use maintenance_work_mem
+#max_stack_depth = 2MB			# min 100kB
+dynamic_shared_memory_type = posix	# the default is the first option
+					# supported by the operating system:
+					#   posix
+					#   sysv
+					#   windows
+					#   mmap
+					# use none to disable dynamic shared memory
+
+# - Disk -
+
+#temp_file_limit = -1			# limits per-session temp file space
+					# in kB, or -1 for no limit
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000		# min 25
+					# (change requires restart)
+#shared_preload_libraries = ''		# (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0			# 0-100 milliseconds
+#vacuum_cost_page_hit = 1		# 0-10000 credits
+#vacuum_cost_page_miss = 10		# 0-10000 credits
+#vacuum_cost_page_dirty = 20		# 0-10000 credits
+#vacuum_cost_limit = 200		# 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms			# 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
+#max_worker_processes = 8
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal			# minimal, archive, hot_standby, or logical
+					# (change requires restart)
+#fsync = on				# turns forced synchronization on or off
+#synchronous_commit = on		# synchronization level;
+					# off, local, remote_write, or on
+#wal_sync_method = fsync		# the default is the first option
+					# supported by the operating system:
+					#   open_datasync
+					#   fdatasync (default on Linux)
+					#   fsync
+					#   fsync_writethrough
+					#   open_sync
+#full_page_writes = on			# recover from partial page writes
+#wal_compression = off			# enable compression of full-page writes
+#wal_log_hints = off			# also do full page writes of non-critical updates
+					# (change requires restart)
+#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
+					# (change requires restart)
+#wal_writer_delay = 200ms		# 1-10000 milliseconds
+
+#commit_delay = 0			# range 0-100000, in microseconds
+#commit_siblings = 5			# range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_timeout = 5min		# range 30s-1h
+#max_wal_size = 1GB
+#min_wal_size = 80MB
+#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s		# 0 disables
+
+# - Archiving -
+
+#archive_mode = off		# enables archiving; off, on, or always
+				# (change requires restart)
+#archive_command = ''		# command to use to archive a logfile segment
+				# placeholders: %p = path of file to archive
+				#               %f = file name only
+				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+#archive_timeout = 0		# force a logfile segment switch after this
+				# number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Sending Server(s) -
+
+# Set these on the master and on any standby that will send replication data.
+
+#max_wal_senders = 0		# max number of walsender processes
+				# (change requires restart)
+#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
+#wal_sender_timeout = 60s	# in milliseconds; 0 disables
+
+#max_replication_slots = 0	# max number of replication slots
+				# (change requires restart)
+#track_commit_timestamp = off	# collect timestamp of transaction commit
+				# (change requires restart)
+
+# - Master Server -
+
+# These settings are ignored on a standby server.
+
+#synchronous_standby_names = ''	# standby servers that provide sync rep
+				# comma-separated list of application_name
+				# from standby(s); '*' = all
+#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
+
+# - Standby Servers -
+
+# These settings are ignored on a master server.
+
+#hot_standby = off			# "on" allows queries during recovery
+					# (change requires restart)
+#max_standby_archive_delay = 30s	# max delay before canceling queries
+					# when reading WAL from archive;
+					# -1 allows indefinite delay
+#max_standby_streaming_delay = 30s	# max delay before canceling queries
+					# when reading streaming WAL;
+					# -1 allows indefinite delay
+#wal_receiver_status_interval = 10s	# send replies at least this often
+					# 0 disables
+#hot_standby_feedback = off		# send info from standby to prevent
+					# query conflicts
+#wal_receiver_timeout = 60s		# time that receiver waits for
+					# communication from master
+					# in milliseconds; 0 disables
+#wal_retrieve_retry_interval = 5s	# time to wait before retrying to
+					# retrieve WAL after a failed attempt
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_indexonlyscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0			# measured on an arbitrary scale
+#random_page_cost = 4.0			# same scale as above
+#cpu_tuple_cost = 0.01			# same scale as above
+#cpu_index_tuple_cost = 0.005		# same scale as above
+#cpu_operator_cost = 0.0025		# same scale as above
+#effective_cache_size = 4GB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5			# range 1-10
+#geqo_pool_size = 0			# selects default based on effort
+#geqo_generations = 0			# selects default based on effort
+#geqo_selection_bias = 2.0		# range 1.5-2.0
+#geqo_seed = 0.0			# range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100	# range 1-10000
+#constraint_exclusion = partition	# on, off, or partition
+#cursor_tuple_fraction = 0.1		# range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8		# 1 disables collapsing of explicit
+					# JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'		# Valid values are combinations of
+					# stderr, csvlog, syslog, and eventlog,
+					# depending on platform.  csvlog
+					# requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off		# Enable capturing of stderr and csvlog
+					# into log files. Required to be on for
+					# csvlogs.
+					# (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'		# directory where log files are written,
+					# can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
+					# can include strftime() escapes
+#log_file_mode = 0600			# creation mode for log files,
+					# begin with 0 to use octal notation
+#log_truncate_on_rotation = off		# If on, an existing log file with the
+					# same name as the new log file will be
+					# truncated rather than appended to.
+					# But such truncation only occurs on
+					# time-driven rotation, not on restarts
+					# or size-driven rotation.  Default is
+					# off, meaning append to existing files
+					# in all cases.
+#log_rotation_age = 1d			# Automatic rotation of logfiles will
+					# happen after that time.  0 disables.
+#log_rotation_size = 10MB		# Automatic rotation of logfiles will
+					# happen after that much log output.
+					# 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+# This is only relevant when logging to eventlog (win32):
+#event_source = 'PostgreSQL'
+
+# - When to Log -
+
+#client_min_messages = notice		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   log
+					#   notice
+					#   warning
+					#   error
+
+#log_min_messages = warning		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic
+
+#log_min_error_statement = error	# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic (effectively off)
+
+#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
+					# and their durations, > 0 logs only
+					# statements running at least this number
+					# of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default		# terse, default, or verbose messages
+#log_hostname = off
+#log_line_prefix = ''			# special values:
+					#   %a = application name
+					#   %u = user name
+					#   %d = database name
+					#   %r = remote host and port
+					#   %h = remote host
+					#   %p = process ID
+					#   %t = timestamp without milliseconds
+					#   %m = timestamp with milliseconds
+					#   %i = command tag
+					#   %e = SQL state
+					#   %c = session ID
+					#   %l = session line number
+					#   %s = session start timestamp
+					#   %v = virtual transaction ID
+					#   %x = transaction ID (0 if none)
+					#   %q = stop here in non-session
+					#        processes
+					#   %% = '%'
+					# e.g. '<%u%%%d> '
+#log_lock_waits = off			# log lock waits >= deadlock_timeout
+#log_statement = 'none'			# none, ddl, mod, all
+#log_replication_commands = off
+#log_temp_files = -1			# log temporary files equal or larger
+					# than the specified size in kilobytes;
+					# -1 disables, 0 logs all temp files
+log_timezone = 'Canada/Eastern'
+
+
+# - Process Title -
+
+#cluster_name = ''			# added to process titles if nonempty
+					# (change requires restart)
+#update_process_title = on
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_io_timing = off
+#track_functions = none			# none, pl, all
+#track_activity_query_size = 1024	# (change requires restart)
+stats_temp_directory = '/run/postgresql'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on			# Enable autovacuum subprocess?  'on'
+					# requires track_counts to also be on.
+#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
+					# their durations, > 0 logs only
+					# actions running at least this number
+					# of milliseconds.
+#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
+					# (change requires restart)
+#autovacuum_naptime = 1min		# time between autovacuum runs
+#autovacuum_vacuum_threshold = 50	# min number of row updates before
+					# vacuum
+#autovacuum_analyze_threshold = 50	# min number of row updates before
+					# analyze
+#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
+					# (change requires restart)
+#autovacuum_multixact_freeze_max_age = 400000000	# maximum multixact age
+					# before forced vacuum
+					# (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
+					# autovacuum, in milliseconds;
+					# -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
+					# autovacuum, -1 means use
+					# vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user", public'	# schema names
+#default_tablespace = ''		# a tablespace name, '' uses the default
+#temp_tablespaces = ''			# a list of tablespace names, '' uses
+					# only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0			# in milliseconds, 0 is disabled
+#lock_timeout = 0			# in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#vacuum_multixact_freeze_min_age = 5000000
+#vacuum_multixact_freeze_table_age = 150000000
+#bytea_output = 'hex'			# hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+#gin_fuzzy_search_limit = 0
+#gin_pending_list_limit = 4MB
+
+# - Locale and Formatting -
+
+datestyle = 'iso, dmy'
+#intervalstyle = 'postgres'
+timezone = 'Canada/Eastern'
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+					# abbreviations.  Currently, there are
+					#   Default
+					#   Australia (historical usage)
+					#   India
+					# You can create your own file in
+					# share/timezonesets/.
+#extra_float_digits = 0			# min -15, max 3
+#client_encoding = sql_ascii		# actually, defaults to database
+					# encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_CA.UTF-8'			# locale for system error message
+					# strings
+lc_monetary = 'en_CA.UTF-8'			# locale for monetary formatting
+lc_numeric = 'en_CA.UTF-8'			# locale for number formatting
+lc_time = 'en_CA.UTF-8'				# locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+#session_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64		# min 10
+					# (change requires restart)
+# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+#max_pred_locks_per_transaction = 64	# min 10
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding	# on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#operator_precedence_warning = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off			# terminate session on any error?
+#restart_after_crash = on		# reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CONFIG FILE INCLUDES
+#------------------------------------------------------------------------------
+
+# These options allow settings to be loaded from files other than the
+# default postgresql.conf.
+
+#include_dir = 'conf.d'			# include files ending in '.conf' from
+					# directory 'conf.d'
+#include_if_exists = 'exists.conf'	# include file only if it exists
+#include = 'special.conf'		# include file
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+# Add settings for extensions here

linux/arch/config/psd/psd.conf

@@ -0,0 +1,56 @@
+#
+# $XDG_HOME_CONFIG/psd/psd.conf
+#
+# For documentation, refer to the psd man page or the wiki page
+# https://wiki.archlinux.org/index.php/Profile-sync-daemon
+
+## NOTE the following:
+## To protect data from corruption, in the event that you do make an edit while
+## psd is active, any changes made will be applied the next time you start psd.
+
+# Uncomment and set to "yes" to use overlayfs instead of a full copy to reduce
+# the memory costs and to improve sync/unsync operations. Note that your kernel
+# MUST have this module available in order to use this mode
+#
+USE_OVERLAYFS="yes"
+
+# List browsers separated by spaces to include in the sync. Useful if you do not
+# wish to have all possible browser profiles sync'ed which is the default if
+# this variable is left commented.
+#
+# Possible values:
+#  chromium
+#  chromium-dev
+#  conkeror.mozdev.org
+#  epiphany
+#  firefox
+#  firefox-trunk
+#  google-chrome
+#  google-chrome-beta
+#  google-chrome-unstable
+#  heftig-aurora
+#  icecat
+#  inox
+#  luakit
+#  midori
+#  opera
+#  opera-beta
+#  opera-developer
+#  opera-legacy
+#  otter-browser
+#  qupzilla
+#  palemoon
+#  rekonq
+#  seamonkey
+#  vivaldi
+#  vivaldi-snapshot
+#
+#BROWSERS=""
+
+# Uncomment and set to "no" to completely disable the crash recovery feature.
+#
+# The default is to create crash recovery backups if the system is ungracefully
+# powered-down due to a kernel panic, hitting the reset switch, battery going
+# dead, etc. Some users keep very diligent backups and don't care to have this
+# feature enabled.
+#USE_BACKUPS="yes"

linux/arch/config/readme.md

@@ -0,0 +1 @@
+These are configs from my Arch Linux setup. They go in ~/.config

linux/arch/config/redshift.conf

@@ -0,0 +1,44 @@
+; Global settings for redshift
+[redshift]
+; Set the day and night screen temperatures
+temp-day=5700
+temp-night=3500
+
+; Enable/Disable a smooth transition between day and night
+; 0 will cause a direct change from day to night screen temperature. 
+; 1 will gradually increase or decrease the screen temperature
+transition=1
+
+; Set the screen brightness. Default is 1.0
+;brightness=0.9
+; It is also possible to use different settings for day and night since version 1.8.
+;brightness-day=0.7
+;brightness-night=0.4
+; Set the screen gamma (for all colors, or each color channel individually)
+gamma=0.8
+;gamma=0.8:0.7:0.8
+
+; Set the location-provider: 'geoclue', 'gnome-clock', 'manual'
+; type 'redshift -l list' to see possible values
+; The location provider settings are in a different section.
+location-provider=manual
+
+; Set the adjustment-method: 'randr', 'vidmode'
+; type 'redshift -m list' to see all possible values
+; 'randr' is the preferred method, 'vidmode' is an older API
+; but works in some cases when 'randr' does not.
+; The adjustment method settings are in a different section.
+adjustment-method=randr
+
+; Configuration of the location-provider:
+; type 'redshift -l PROVIDER:help' to see the settings
+; e.g. 'redshift -l manual:help'
+[manual]
+lat=43.42
+lon=-79.24
+
+; Configuration of the adjustment-method
+; type 'redshift -m METHOD:help' to see the settings
+; ex: 'redshift -m randr:help'
+[randr]
+screen=0

linux/arch/config/terminator/config

@@ -0,0 +1,265 @@
+[global_config]
+  enabled_plugins = LaunchpadCodeURLHandler, SearchGoogle, APTURLHandler, LaunchpadBugURLHandler
+  inactive_color_offset = 0.79
+  suppress_multiple_term_dialog = True
+  title_hide_sizetext = True
+  window_state = maximise
+[keybindings]
+  close_term = <Primary>w
+  insert_number = None
+  new_tab = <Primary>t
+  paste = <Primary>v
+  rotate_cw = <Primary><Shift>r
+  split_horiz = <Primary><Shift>d
+  split_vert = <Primary>d
+  switch_to_tab_1 = <Super>1
+  switch_to_tab_10 = <Super>0
+  switch_to_tab_2 = <Super>2
+  switch_to_tab_3 = <Super>3
+  switch_to_tab_4 = <Super>4
+  switch_to_tab_5 = <Super>5
+  switch_to_tab_6 = <Super>6
+  switch_to_tab_7 = <Super>7
+  switch_to_tab_8 = <Super>8
+  switch_to_tab_9 = <Super>9
+[layouts]
+  [[default]]
+    [[[child1]]]
+      parent = window0
+      type = Terminal
+    [[[window0]]]
+      parent = ""
+      type = Window
+  [[Dive]]
+    [[[child0]]]
+      fullscreen = False
+      last_active_window = True
+      maximised = True
+      order = 0
+      parent = ""
+      position = 0:0
+      size = 1920, 1031
+      title = /bin/zsh
+      type = Window
+    [[[child1]]]
+      active_page = 0
+      labels = None, None
+      last_active_term = d64ba4f9-edb7-4ced-942e-49a69033480f, 4f4cffb2-74fa-4d07-a7b4-c5f30ece39b2
+      order = 0
+      parent = child0
+      type = Notebook
+    [[[child2]]]
+      order = 0
+      parent = child1
+      position = 958
+      ratio = 0.49921875
+      type = HPaned
+    [[[child3]]]
+      order = 0
+      parent = child2
+      position = 502
+      ratio = 0.5
+      type = VPaned
+    [[[child6]]]
+      order = 1
+      parent = child2
+      position = 502
+      ratio = 0.5
+      type = VPaned
+    [[[child7]]]
+      order = 0
+      parent = child6
+      position = 251
+      ratio = 0.500996015936
+      type = VPaned
+    [[[terminal10]]]
+      command = lein repl; zsh
+      directory = /home/michael/.work-files/dive-networks/dive-web-app/
+      order = 1
+      parent = child6
+      profile = default
+      type = Terminal
+      uuid = a51152d4-6cb9-4d72-97fc-39bdf1376818
+    [[[terminal11]]]
+      command = ""
+      directory = /home/michael/.work-files/dive-networks/dive-web-app/
+      order = 1
+      parent = child1
+      profile = default
+      type = Terminal
+      uuid = 4f4cffb2-74fa-4d07-a7b4-c5f30ece39b2
+    [[[terminal4]]]
+      command = ""
+      directory = /home/michael/.work-files/dive-networks/dive-web-app/
+      order = 0
+      parent = child3
+      profile = default
+      type = Terminal
+      uuid = d64ba4f9-edb7-4ced-942e-49a69033480f
+    [[[terminal5]]]
+      command = tail -f figwheel_server.log; zsh
+      directory = /home/michael/.work-files/dive-networks/dive-web-app/
+      order = 1
+      parent = child3
+      profile = default
+      type = Terminal
+      uuid = 41f364c3-36b4-4af5-b999-2b2141b85319
+    [[[terminal8]]]
+      command = lein dev-css; zsh
+      directory = /home/michael/.work-files/dive-networks/dive-web-app/
+      order = 0
+      parent = child7
+      profile = default
+      type = Terminal
+      uuid = 5e14119d-8778-4226-a424-b9c5eca80292
+    [[[terminal9]]]
+      command = watch free -h; zsh
+      directory = /home/michael/.work-files/dive-networks/dive-web-app/
+      order = 1
+      parent = child7
+      profile = default
+      type = Terminal
+      uuid = 8eec6a48-cbfb-449c-b49e-704da6e5996d
+  [[nightdive]]
+    [[[child0]]]
+      fullscreen = False
+      last_active_window = True
+      maximised = True
+      order = 0
+      parent = ""
+      position = 0:0
+      size = 1920, 1032
+      title = /bin/zsh
+      type = Window
+    [[[child1]]]
+      active_page = 1
+      labels = None, None
+      last_active_term = d64ba4f9-edb7-4ced-942e-49a69033480f, 4f4cffb2-74fa-4d07-a7b4-c5f30ece39b2
+      order = 0
+      parent = child0
+      type = Notebook
+    [[[child12]]]
+      order = 1
+      parent = child6
+      position = 534
+      ratio = 0.508079847909
+      type = HPaned
+    [[[child2]]]
+      order = 0
+      parent = child1
+      position = 867
+      ratio = 0.451822916667
+      type = HPaned
+    [[[child3]]]
+      order = 0
+      parent = child2
+      position = 502
+      ratio = 0.499502982107
+      type = VPaned
+    [[[child6]]]
+      order = 1
+      parent = child2
+      position = 502
+      ratio = 0.499502982107
+      type = VPaned
+    [[[child7]]]
+      order = 0
+      parent = child6
+      position = 250
+      ratio = 0.499003984064
+      type = VPaned
+    [[[child9]]]
+      order = 1
+      parent = child7
+      position = 534
+      ratio = 0.508079847909
+      type = HPaned
+    [[[terminal10]]]
+      order = 0
+      parent = child9
+      profile = default
+      type = Terminal
+      uuid = 8eec6a48-cbfb-449c-b49e-704da6e5996d
+    [[[terminal11]]]
+      order = 1
+      parent = child9
+      profile = default
+      type = Terminal
+      uuid = 4d558fe8-344a-47dd-8ccf-c17d1d796de4
+    [[[terminal13]]]
+      order = 0
+      parent = child12
+      profile = default
+      type = Terminal
+      uuid = a51152d4-6cb9-4d72-97fc-39bdf1376818
+    [[[terminal14]]]
+      order = 1
+      parent = child12
+      profile = default
+      type = Terminal
+      uuid = c1af7bb4-a6b9-4839-bf52-ed97a91a91c5
+    [[[terminal15]]]
+      directory = /home/michael/
+      order = 1
+      parent = child1
+      profile = default
+      type = Terminal
+      uuid = 4f4cffb2-74fa-4d07-a7b4-c5f30ece39b2
+    [[[terminal4]]]
+      order = 0
+      parent = child3
+      profile = default
+      type = Terminal
+      uuid = d64ba4f9-edb7-4ced-942e-49a69033480f
+    [[[terminal5]]]
+      order = 1
+      parent = child3
+      profile = default
+      type = Terminal
+      uuid = 41f364c3-36b4-4af5-b999-2b2141b85319
+    [[[terminal8]]]
+      order = 0
+      parent = child7
+      profile = default
+      type = Terminal
+      uuid = 5e14119d-8778-4226-a424-b9c5eca80292
+[plugins]
+  [[GrepEditor]]
+    command = vim +{line} {filepath}
+    groups = file line
+    match = ([^ \t\n\r\f\v:]+?):([0-9]+)
+[profiles]
+  [[default]]
+    background_color = "#060505"
+    background_darkness = 0.81
+    background_image = None
+    copy_on_selection = True
+    cursor_color = "#bbbbbb"
+    font = Consolas 10
+    foreground_color = "#d1c6ca"
+    palette = "#0a1b26:#bb0000:#7c00ff:#bbbb00:#00ff08:#00cdd7:#10bba2:#c8cac8:#545c7a:#ff5555:#ceef00:#ffe5f5:#5555ff:#ff6ddd:#2eb0ff:#f7fbff"
+    scrollback_lines = 20000
+    use_system_font = False
+  [[iterm-mike]]
+    background_color = "#060505"
+    background_darkness = 0.81
+    background_image = None
+    copy_on_selection = True
+    cursor_color = "#bbbbbb"
+    cursor_shape = underline
+    font = Consolas 10
+    foreground_color = "#d1c6ca"
+    palette = "#141414:#bb0000:#7c00ff:#bbbb00:#00ff08:#00cdd7:#10bba2:#cacaca:#555555:#ff5555:#ceef00:#ffe5f5:#5555ff:#ff6ddd:#2eb0ff:#f7fbff"
+    scrollback_lines = 20000
+    use_system_font = False
+  [[original]]
+    background_darkness = 0.81
+    background_image = None
+    background_type = transparent
+    copy_on_selection = True
+    cursor_color = "#cdcfbd"
+    cursor_shape = underline
+    font = DejaVu Sans Mono 12
+    palette = "#073642:#dc322f:#859900:#b58900:#268bd2:#d33682:#2aa198:#eee8d5:#002b36:#cb4b16:#586e75:#657b83:#839496:#6c71c4:#93a1a1:#fdf6e3"
+    scrollback_lines = 20000
+    use_system_font = False

linux/arch/config/terminator/plugins/search-google.py

@@ -0,0 +1,55 @@
+import gtk
+import urllib
+import terminatorlib.plugin as plugin
+import re
+
+# Written by John Cooper http://choffee.co.uk
+# Copyright 2010 John Cooper
+# See copyright file that comes with this file for full licence
+
+# Modified by cgw 2011/11/06
+
+# AVAILABLE must contain a list of all the classes that you want exposed
+AVAILABLE = ['SearchGoogle']
+
+_spaces = re.compile(" +")
+
+# TODO:   move some of the constants into a config object
+
+class SearchGoogle(plugin.Plugin):
+    capabilities = ['terminal_menu']
+
+    def do_search(self, searchMenu):
+        """Launch Google search for string"""
+        if not self.searchstring:
+            return
+        base_uri = "http://www.google.com/search?q=%s"
+        uri = base_uri % urllib.quote(self.searchstring.encode("utf-8"))
+        gtk.show_uri(None, uri, gtk.gdk.CURRENT_TIME)
+
+    def callback(self, menuitems, menu, terminal):
+        """Add our menu item to the menu"""
+        self.terminal = terminal
+        item = gtk.ImageMenuItem(gtk.STOCK_FIND)
+        item.connect('activate', self.do_search)
+        if terminal.vte.get_has_selection():
+            clip = gtk.clipboard_get(gtk.gdk.SELECTION_PRIMARY)
+            self.searchstring = clip.wait_for_text().strip()
+            self.searchstring = self.searchstring.replace("\n", " ")
+            self.searchstring = self.searchstring.replace("\t", " ")
+            self.searchstring = _spaces.sub(" ", self.searchstring)
+        else:
+            self.searchstring = None
+        if self.searchstring:
+            if len(self.searchstring) > 40:
+                displaystring = self.searchstring[:37] + "..."
+            else:
+                displaystring = self.searchstring
+            item.set_label("Search Google for \"%s\"" % displaystring)
+            item.set_sensitive(True)
+        else:
+            item.set_label("Search Google")
+            item.set_sensitive(False)
+        # Avoid turning any underscores in selection into menu accelerators
+        item.set_use_underline(False)
+        menuitems.append(item)