michael/dotfiles
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Relocate arch config

Browse Source
This commit is contained in:
Michael Campagnaro
2016-10-30 20:48:06 -04:00
parent 76621dd3b8
commit ff590a4c6d
16 changed files with 859 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
config/compton.conf
View File

@@ -1,4 +0,0 @@
# Shadow
shadow = true;
no-dnd-shadow = true;
no-dock-shadow = true;

10
config/ctags
View File

@@ -1,10 +0,0 @@
--recurse=yes
--exclude=.git
--exclude=vendor/*
--exclude=node_modules/*
--exclude=db/*
--exclude=log/*
--exclude=personal/*
--exclude=public/*
--exclude=resources/public/*
--exclude=target/*

136
config/gnupg/gpg.conf
View File

@@ -1,136 +0,0 @@
# Options for GnuPG
# Copyright 1998-2003, 2010 Free Software Foundation, Inc.
# Copyright 1998-2003, 2010 Werner Koch
#
# This file is free software; as a special exception the author gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# This file is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# Unless you specify which option file to use (with the command line
# option "--options filename"), GnuPG uses the file ~/.gnupg/gpg.conf
# by default.
#
# An options file can contain any long options which are available in
# GnuPG. If the first non white space character of a line is a '#',
# this line is ignored. Empty lines are also ignored.
#
# See the gpg man page for a list of options.
# If you have more than 1 secret key in your keyring, you may want to
# uncomment the following option and set your preferred keyid.
#default-key 621CC013
# If you do not pass a recipient to gpg, it will ask for one. Using
# this option you can encrypt to a default key. Key validation will
# not be done in this case. The second form uses the default key as
# default recipient.
#default-recipient some-user-id
#default-recipient-self
# Group names may be defined like this:
# group mynames = paige 0x12345678 joe patti
#
# Any time "mynames" is a recipient (-r or --recipient), it will be
# expanded to the names "paige", "joe", and "patti", and the key ID
# "0x12345678". Note there is only one level of expansion - you
# cannot make an group that points to another group. Note also that
# if there are spaces in the recipient name, this will appear as two
# recipients. In these cases it is better to use the key ID.
#group mynames = paige 0x12345678 joe patti
# GnuPG can automatically locate and retrieve keys as needed using
# this option. This happens when encrypting to an email address (in
# the "user@@example.com" form) and there are no keys matching
# "user@example.com" in the local keyring. This option takes any
# number mechanisms which are tried in the given order. The default
# is "--auto-key-locate local" to search for keys only in the local
# key database. Uncomment the next line to locate a missing key using
# two DNS based mechanisms.
#auto-key-locate local,pka,dane
# Common options for keyserver functions:
# (Note that the --keyserver option has been moved to dirmngr.conf)
#
# include-disabled = when searching, include keys marked as "disabled"
# on the keyserver (not all keyservers support this).
#
# no-include-revoked = when searching, do not include keys marked as
# "revoked" on the keyserver.
#
# verbose = show more information as the keys are fetched.
# Can be used more than once to increase the amount
# of information shown.
#
# auto-key-retrieve = automatically fetch keys as needed from the keyserver
# when verifying signatures or when importing keys that
# have been revoked by a revocation key that is not
# present on the keyring.
#
# no-include-attributes = do not include attribute IDs (aka "photo IDs")
# when sending keys to the keyserver.
#keyserver-options auto-key-retrieve
# Uncomment this line to display photo user IDs in key listings and
# when a signature from a key with a photo is verified.
#show-photos
# Use this program to display photo user IDs
#
# %i is expanded to a temporary file that contains the photo.
# %I is the same as %i, but the file isn't deleted afterwards by GnuPG.
# %k is expanded to the key ID of the key.
# %K is expanded to the long OpenPGP key ID of the key.
# %t is expanded to the extension of the image (e.g. "jpg").
# %T is expanded to the MIME type of the image (e.g. "image/jpeg").
# %f is expanded to the fingerprint of the key.
# %% is %, of course.
#
# If %i or %I are not present, then the photo is supplied to the
# viewer on standard input. If your platform supports it, standard
# input is the best way to do this as it avoids the time and effort in
# generating and then cleaning up a secure temp file.
#
# The default program is "xloadimage -fork -quiet -title 'KeyID 0x%k' stdin"
# On Mac OS X and Windows, the default is to use your regular JPEG image
# viewer.
#
# Some other viewers:
# photo-viewer "qiv %i"
# photo-viewer "ee %i"
# photo-viewer "display -title 'KeyID 0x%k'"
#
# This one saves a copy of the photo ID in your home directory:
# photo-viewer "cat > ~/photoid-for-key-%k.%t"
#
# Use your MIME handler to view photos:
# photo-viewer "metamail -q -d -b -c %T -s 'KeyID 0x%k' -f GnuPG"
# Because some mailers change lines starting with "From " to ">From "
# it is good to handle such lines in a special way when creating
# cleartext signatures; all other PGP versions do it this way too.
# To enable full OpenPGP compliance you may want to use this option.
#no-escape-from-lines
# Uncomment the following option to get rid of the copyright notice
#no-greeting

2
config/lxpanel/LXDE/config
View File

@@ -1,2 +0,0 @@
[Command]
Logout=lxde-logout

160
config/lxpanel/LXDE/panels/panel
View File

@@ -1,160 +0,0 @@
# lxpanel <profile> config file. Manually editing is not recommended.
# Use preference dialog in lxpanel to adjust config when you can.
Global {
edge=bottom
allign=left
margin=0
widthtype=percent
width=100
height=26
transparent=0
tintcolor=#000000
alpha=0
setdocktype=1
setpartialstrut=1
usefontcolor=1
fontcolor=#ffffff
background=1
backgroundfile=/usr/share/lxpanel/images/background.png
}
Plugin {
type=space
Config {
Size=2
}
}
Plugin {
type=menu
Config {
image=/usr/share/lxde/images/lxde-icon.png
system {
}
separator {
}
item {
command=run
}
separator {
}
item {
image=gnome-logout
command=logout
}
}
}
Plugin {
type=launchbar
Config {
Button {
id=pcmanfm.desktop
}
}
}
Plugin {
type=space
Config {
Size=4
}
}
Plugin {
type=wincmd
Config {
Button1=iconify
Button2=shade
}
}
Plugin {
type=space
Config {
Size=10
}
}
Plugin {
type=launchbar
Config {
Button {
id=menu://applications/Internet/google-chrome.desktop
}
Button {
id=/usr/share/applications/terminator.desktop
}
Button {
id=/usr/share/applications/slack.desktop
}
Button {
id=/usr/share/applications/telegramdesktop.desktop
}
Button {
id=/usr/share/applications/spotify.desktop
}
Button {
id=menu://applications/chrome-apps/chrome-hmjkmjkepdijhoojdojkdfohbdgmmhki-Default.desktop
}
Button {
id=/usr/share/applications/synergy.desktop
}
Button {
id=menu://applications/System/lxtask.desktop
}
}
}
Plugin {
type=space
Config {
Size=4
}
}
Plugin {
type=taskbar
expand=1
Config {
tooltips=1
IconsOnly=0
AcceptSkipPager=1
ShowIconified=1
ShowMapped=1
ShowAllDesks=0
UseMouseWheel=1
UseUrgencyHint=1
FlatButton=0
MaxTaskWidth=150
spacing=1
}
}
Plugin {
type=netstat
Config {
}
}
Plugin {
type=cpu
Config {
}
}
Plugin {
type=tray
Config {
}
}
Plugin {
type=dclock
Config {
ClockFmt=%R:%S
TooltipFmt=%A %x
BoldFont=0
IconOnly=0
CenterText=0
}
}
Plugin {
type=launchbar
Config {
Button {
id=lxde-screenlock.desktop
}
Button {
id=lxde-logout.desktop
}
}
}

4
config/lxpanel/launchtaskbar.cfg
View File

@@ -1,4 +0,0 @@
[special_cases]
synaptic=synaptic-pkexec
soffice.bin=libreoffice
x-terminal-emulator=lxterminal

4
config/openbox/autostart
View File

@@ -1,4 +0,0 @@
compton &
conky &
numlockx &
redshift &

9
config/openbox/rc.xml
View File

@@ -1,9 +0,0 @@
<keybind key="W-x">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>oblogut</name>
</startupnotify>
<command>oblogout</command>
</action>
</keybind>

3
config/pacman/makepkg.conf
View File

@@ -1,3 +0,0 @@
# Compile in tmpfs
BUILDDIR=/tmp/makepkg
PKGDEST=~/.packages

630
config/postgresql.conf
View File

@@ -1,630 +0,0 @@
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# (The "=" is optional.) Whitespace may be used. Comments are introduced with
# "#" anywhere on a line. The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal. If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload". Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on". Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units: kB = kilobytes Time units: ms = milliseconds
# MB = megabytes s = seconds
# GB = gigabytes min = minutes
# TB = terabytes h = hours
# d = days
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.
#data_directory = 'ConfigDir' # use data in another directory
# (change requires restart)
#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
# (change requires restart)
#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
# (change requires restart)
# If external_pid_file is not explicitly set, no extra PID file is written.
#external_pid_file = '' # write an extra PID file
# (change requires restart)
#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------
# - Connection Settings -
#listen_addresses = 'localhost' # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost'; use '*' for all
# (change requires restart)
#port = 5432 # (change requires restart)
max_connections = 100 # (change requires restart)
# Note: Increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction).
#superuser_reserved_connections = 3 # (change requires restart)
#unix_socket_directories = '/run/postgresql' # comma-separated list of directories
# (change requires restart)
#unix_socket_group = '' # (change requires restart)
#unix_socket_permissions = 0777 # begin with 0 to use octal notation
# (change requires restart)
#bonjour = off # advertise server via Bonjour
# (change requires restart)
#bonjour_name = '' # defaults to the computer name
# (change requires restart)
# - Security and Authentication -
#authentication_timeout = 1min # 1s-600s
#ssl = off # (change requires restart)
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
# (change requires restart)
#ssl_prefer_server_ciphers = on # (change requires restart)
#ssl_ecdh_curve = 'prime256v1' # (change requires restart)
#ssl_cert_file = 'server.crt' # (change requires restart)
#ssl_key_file = 'server.key' # (change requires restart)
#ssl_ca_file = '' # (change requires restart)
#ssl_crl_file = '' # (change requires restart)
#password_encryption = on
#db_user_namespace = off
#row_security = on
# GSSAPI using Kerberos
#krb_server_keyfile = ''
#krb_caseins_users = off
# - TCP Keepalives -
# see "man 7 tcp" for details
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
# 0 selects the system default
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
# 0 selects the system default
#tcp_keepalives_count = 0 # TCP_KEEPCNT;
# 0 selects the system default
#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------
# - Memory -
shared_buffers = 128MB # min 128kB
# (change requires restart)
#huge_pages = try # on, off, or try
# (change requires restart)
#temp_buffers = 8MB # min 800kB
#max_prepared_transactions = 0 # zero disables the feature
# (change requires restart)
# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory
# per transaction slot, plus lock space (see max_locks_per_transaction).
# It is not advisable to set max_prepared_transactions nonzero unless you
# actively intend to use prepared transactions.
#work_mem = 4MB # min 64kB
#maintenance_work_mem = 64MB # min 1MB
#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
#max_stack_depth = 2MB # min 100kB
dynamic_shared_memory_type = posix # the default is the first option
# supported by the operating system:
# posix
# sysv
# windows
# mmap
# use none to disable dynamic shared memory
# - Disk -
#temp_file_limit = -1 # limits per-session temp file space
# in kB, or -1 for no limit
# - Kernel Resource Usage -
#max_files_per_process = 1000 # min 25
# (change requires restart)
#shared_preload_libraries = '' # (change requires restart)
# - Cost-Based Vacuum Delay -
#vacuum_cost_delay = 0 # 0-100 milliseconds
#vacuum_cost_page_hit = 1 # 0-10000 credits
#vacuum_cost_page_miss = 10 # 0-10000 credits
#vacuum_cost_page_dirty = 20 # 0-10000 credits
#vacuum_cost_limit = 200 # 1-10000 credits
# - Background Writer -
#bgwriter_delay = 200ms # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
# - Asynchronous Behavior -
#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
#max_worker_processes = 8
#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------
# - Settings -
#wal_level = minimal # minimal, archive, hot_standby, or logical
# (change requires restart)
#fsync = on # turns forced synchronization on or off
#synchronous_commit = on # synchronization level;
# off, local, remote_write, or on
#wal_sync_method = fsync # the default is the first option
# supported by the operating system:
# open_datasync
# fdatasync (default on Linux)
# fsync
# fsync_writethrough
# open_sync
#full_page_writes = on # recover from partial page writes
#wal_compression = off # enable compression of full-page writes
#wal_log_hints = off # also do full page writes of non-critical updates
# (change requires restart)
#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
# (change requires restart)
#wal_writer_delay = 200ms # 1-10000 milliseconds
#commit_delay = 0 # range 0-100000, in microseconds
#commit_siblings = 5 # range 1-1000
# - Checkpoints -
#checkpoint_timeout = 5min # range 30s-1h
#max_wal_size = 1GB
#min_wal_size = 80MB
#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
#checkpoint_warning = 30s # 0 disables
# - Archiving -
#archive_mode = off # enables archiving; off, on, or always
# (change requires restart)
#archive_command = '' # command to use to archive a logfile segment
# placeholders: %p = path of file to archive
# %f = file name only
# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
#archive_timeout = 0 # force a logfile segment switch after this
# number of seconds; 0 disables
#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------
# - Sending Server(s) -
# Set these on the master and on any standby that will send replication data.
#max_wal_senders = 0 # max number of walsender processes
# (change requires restart)
#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
#wal_sender_timeout = 60s # in milliseconds; 0 disables
#max_replication_slots = 0 # max number of replication slots
# (change requires restart)
#track_commit_timestamp = off # collect timestamp of transaction commit
# (change requires restart)
# - Master Server -
# These settings are ignored on a standby server.
#synchronous_standby_names = '' # standby servers that provide sync rep
# comma-separated list of application_name
# from standby(s); '*' = all
#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
# - Standby Servers -
# These settings are ignored on a master server.
#hot_standby = off # "on" allows queries during recovery
# (change requires restart)
#max_standby_archive_delay = 30s # max delay before canceling queries
# when reading WAL from archive;
# -1 allows indefinite delay
#max_standby_streaming_delay = 30s # max delay before canceling queries
# when reading streaming WAL;
# -1 allows indefinite delay
#wal_receiver_status_interval = 10s # send replies at least this often
# 0 disables
#hot_standby_feedback = off # send info from standby to prevent
# query conflicts
#wal_receiver_timeout = 60s # time that receiver waits for
# communication from master
# in milliseconds; 0 disables
#wal_retrieve_retry_interval = 5s # time to wait before retrying to
# retrieve WAL after a failed attempt
#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------
# - Planner Method Configuration -
#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_indexonlyscan = on
#enable_material = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on
# - Planner Cost Constants -
#seq_page_cost = 1.0 # measured on an arbitrary scale
#random_page_cost = 4.0 # same scale as above
#cpu_tuple_cost = 0.01 # same scale as above
#cpu_index_tuple_cost = 0.005 # same scale as above
#cpu_operator_cost = 0.0025 # same scale as above
#effective_cache_size = 4GB
# - Genetic Query Optimizer -
#geqo = on
#geqo_threshold = 12
#geqo_effort = 5 # range 1-10
#geqo_pool_size = 0 # selects default based on effort
#geqo_generations = 0 # selects default based on effort
#geqo_selection_bias = 2.0 # range 1.5-2.0
#geqo_seed = 0.0 # range 0.0-1.0
# - Other Planner Options -
#default_statistics_target = 100 # range 1-10000
#constraint_exclusion = partition # on, off, or partition
#cursor_tuple_fraction = 0.1 # range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8 # 1 disables collapsing of explicit
# JOIN clauses
#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------
# - Where to Log -
#log_destination = 'stderr' # Valid values are combinations of
# stderr, csvlog, syslog, and eventlog,
# depending on platform. csvlog
# requires logging_collector to be on.
# This is used when logging to stderr:
#logging_collector = off # Enable capturing of stderr and csvlog
# into log files. Required to be on for
# csvlogs.
# (change requires restart)
# These are only used if logging_collector is on:
#log_directory = 'pg_log' # directory where log files are written,
# can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
# can include strftime() escapes
#log_file_mode = 0600 # creation mode for log files,
# begin with 0 to use octal notation
#log_truncate_on_rotation = off # If on, an existing log file with the
# same name as the new log file will be
# truncated rather than appended to.
# But such truncation only occurs on
# time-driven rotation, not on restarts
# or size-driven rotation. Default is
# off, meaning append to existing files
# in all cases.
#log_rotation_age = 1d # Automatic rotation of logfiles will
# happen after that time. 0 disables.
#log_rotation_size = 10MB # Automatic rotation of logfiles will
# happen after that much log output.
# 0 disables.
# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
# This is only relevant when logging to eventlog (win32):
#event_source = 'PostgreSQL'
# - When to Log -
#client_min_messages = notice # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# log
# notice
# warning
# error
#log_min_messages = warning # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic
#log_min_error_statement = error # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic (effectively off)
#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
# and their durations, > 0 logs only
# statements running at least this number
# of milliseconds
# - What to Log -
#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_error_verbosity = default # terse, default, or verbose messages
#log_hostname = off
#log_line_prefix = '' # special values:
# %a = application name
# %u = user name
# %d = database name
# %r = remote host and port
# %h = remote host
# %p = process ID
# %t = timestamp without milliseconds
# %m = timestamp with milliseconds
# %i = command tag
# %e = SQL state
# %c = session ID
# %l = session line number
# %s = session start timestamp
# %v = virtual transaction ID
# %x = transaction ID (0 if none)
# %q = stop here in non-session
# processes
# %% = '%'
# e.g. '<%u%%%d> '
#log_lock_waits = off # log lock waits >= deadlock_timeout
#log_statement = 'none' # none, ddl, mod, all
#log_replication_commands = off
#log_temp_files = -1 # log temporary files equal or larger
# than the specified size in kilobytes;
# -1 disables, 0 logs all temp files
log_timezone = 'Canada/Eastern'
# - Process Title -
#cluster_name = '' # added to process titles if nonempty
# (change requires restart)
#update_process_title = on
#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------
# - Query/Index Statistics Collector -
#track_activities = on
#track_counts = on
#track_io_timing = off
#track_functions = none # none, pl, all
#track_activity_query_size = 1024 # (change requires restart)
stats_temp_directory = '/run/postgresql'
# - Statistics Monitoring -
#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off
#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------
#autovacuum = on # Enable autovacuum subprocess? 'on'
# requires track_counts to also be on.
#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
# their durations, > 0 logs only
# actions running at least this number
# of milliseconds.
#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
# (change requires restart)
#autovacuum_naptime = 1min # time between autovacuum runs
#autovacuum_vacuum_threshold = 50 # min number of row updates before
# vacuum
#autovacuum_analyze_threshold = 50 # min number of row updates before
# analyze
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
# (change requires restart)
#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
# before forced vacuum
# (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
# autovacuum, in milliseconds;
# -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
# autovacuum, -1 means use
# vacuum_cost_limit
#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------
# - Statement Behavior -
#search_path = '"$user", public' # schema names
#default_tablespace = '' # a tablespace name, '' uses the default
#temp_tablespaces = '' # a list of tablespace names, '' uses
# only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#default_transaction_deferrable = off
#session_replication_role = 'origin'
#statement_timeout = 0 # in milliseconds, 0 is disabled
#lock_timeout = 0 # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#vacuum_multixact_freeze_min_age = 5000000
#vacuum_multixact_freeze_table_age = 150000000
#bytea_output = 'hex' # hex, escape
#xmlbinary = 'base64'
#xmloption = 'content'
#gin_fuzzy_search_limit = 0
#gin_pending_list_limit = 4MB
# - Locale and Formatting -
datestyle = 'iso, dmy'
#intervalstyle = 'postgres'
timezone = 'Canada/Eastern'
#timezone_abbreviations = 'Default' # Select the set of available time zone
# abbreviations. Currently, there are
# Default
# Australia (historical usage)
# India
# You can create your own file in
# share/timezonesets/.
#extra_float_digits = 0 # min -15, max 3
#client_encoding = sql_ascii # actually, defaults to database
# encoding
# These settings are initialized by initdb, but they can be changed.
lc_messages = 'en_CA.UTF-8' # locale for system error message
# strings
lc_monetary = 'en_CA.UTF-8' # locale for monetary formatting
lc_numeric = 'en_CA.UTF-8' # locale for number formatting
lc_time = 'en_CA.UTF-8' # locale for time formatting
# default configuration for text search
default_text_search_config = 'pg_catalog.english'
# - Other Defaults -
#dynamic_library_path = '$libdir'
#local_preload_libraries = ''
#session_preload_libraries = ''
#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------
#deadlock_timeout = 1s
#max_locks_per_transaction = 64 # min 10
# (change requires restart)
# Note: Each lock table slot uses ~270 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.
#max_pred_locks_per_transaction = 64 # min 10
# (change requires restart)
#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------
# - Previous PostgreSQL Versions -
#array_nulls = on
#backslash_quote = safe_encoding # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#lo_compat_privileges = off
#operator_precedence_warning = off
#quote_all_identifiers = off
#sql_inheritance = on
#standard_conforming_strings = on
#synchronize_seqscans = on
# - Other Platforms and Clients -
#transform_null_equals = off
#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------
#exit_on_error = off # terminate session on any error?
#restart_after_crash = on # reinitialize after backend crash?
#------------------------------------------------------------------------------
# CONFIG FILE INCLUDES
#------------------------------------------------------------------------------
# These options allow settings to be loaded from files other than the
# default postgresql.conf.
#include_dir = 'conf.d' # include files ending in '.conf' from
# directory 'conf.d'
#include_if_exists = 'exists.conf' # include file only if it exists
#include = 'special.conf' # include file
#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------
# Add settings for extensions here

56
config/psd/psd.conf
View File

@@ -1,56 +0,0 @@
#
# $XDG_HOME_CONFIG/psd/psd.conf
#
# For documentation, refer to the psd man page or the wiki page
# https://wiki.archlinux.org/index.php/Profile-sync-daemon
## NOTE the following:
## To protect data from corruption, in the event that you do make an edit while
## psd is active, any changes made will be applied the next time you start psd.
# Uncomment and set to "yes" to use overlayfs instead of a full copy to reduce
# the memory costs and to improve sync/unsync operations. Note that your kernel
# MUST have this module available in order to use this mode
#
USE_OVERLAYFS="yes"
# List browsers separated by spaces to include in the sync. Useful if you do not
# wish to have all possible browser profiles sync'ed which is the default if
# this variable is left commented.
#
# Possible values:
# chromium
# chromium-dev
# conkeror.mozdev.org
# epiphany
# firefox
# firefox-trunk
# google-chrome
# google-chrome-beta
# google-chrome-unstable
# heftig-aurora
# icecat
# inox
# luakit
# midori
# opera
# opera-beta
# opera-developer
# opera-legacy
# otter-browser
# qupzilla
# palemoon
# rekonq
# seamonkey
# vivaldi
# vivaldi-snapshot
#
#BROWSERS=""
# Uncomment and set to "no" to completely disable the crash recovery feature.
#
# The default is to create crash recovery backups if the system is ungracefully
# powered-down due to a kernel panic, hitting the reset switch, battery going
# dead, etc. Some users keep very diligent backups and don't care to have this
# feature enabled.
#USE_BACKUPS="yes"

1
config/readme.md
View File

@@ -1 +0,0 @@
These are configs from my Arch Linux setup. They go in ~/.config

44
config/redshift.conf
View File

@@ -1,44 +0,0 @@
; Global settings for redshift
[redshift]
; Set the day and night screen temperatures
temp-day=5700
temp-night=3500
; Enable/Disable a smooth transition between day and night
; 0 will cause a direct change from day to night screen temperature.
; 1 will gradually increase or decrease the screen temperature
transition=1
; Set the screen brightness. Default is 1.0
;brightness=0.9
; It is also possible to use different settings for day and night since version 1.8.
;brightness-day=0.7
;brightness-night=0.4
; Set the screen gamma (for all colors, or each color channel individually)
gamma=0.8
;gamma=0.8:0.7:0.8
; Set the location-provider: 'geoclue', 'gnome-clock', 'manual'
; type 'redshift -l list' to see possible values
; The location provider settings are in a different section.
location-provider=manual
; Set the adjustment-method: 'randr', 'vidmode'
; type 'redshift -m list' to see all possible values
; 'randr' is the preferred method, 'vidmode' is an older API
; but works in some cases when 'randr' does not.
; The adjustment method settings are in a different section.
adjustment-method=randr
; Configuration of the location-provider:
; type 'redshift -l PROVIDER:help' to see the settings
; e.g. 'redshift -l manual:help'
[manual]
lat=43.42
lon=-79.24
; Configuration of the adjustment-method
; type 'redshift -m METHOD:help' to see the settings
; ex: 'redshift -m randr:help'
[randr]
screen=0

162
config/terminator/config
View File

@@ -1,162 +0,0 @@
[global_config]
enabled_plugins = LaunchpadCodeURLHandler, SearchGoogle, APTURLHandler, LaunchpadBugURLHandler
inactive_color_offset = 0.79
suppress_multiple_term_dialog = True
title_hide_sizetext = True
window_state = maximise
[keybindings]
close_term = <Primary>w
insert_number = None
new_tab = <Primary>t
paste = <Primary>v
rotate_cw = <Primary><Shift>r
split_horiz = <Primary><Shift>d
split_vert = <Primary>d
switch_to_tab_1 = <Super>1
switch_to_tab_10 = <Super>0
switch_to_tab_2 = <Super>2
switch_to_tab_3 = <Super>3
switch_to_tab_4 = <Super>4
switch_to_tab_5 = <Super>5
switch_to_tab_6 = <Super>6
switch_to_tab_7 = <Super>7
switch_to_tab_8 = <Super>8
switch_to_tab_9 = <Super>9
[layouts]
[[default]]
[[[child1]]]
parent = window0
type = Terminal
[[[window0]]]
parent = ""
type = Window
[[Dive]]
[[[child0]]]
fullscreen = False
last_active_window = True
maximised = True
order = 0
parent = ""
position = 0:0
size = 1920, 1031
title = /bin/zsh
type = Window
[[[child1]]]
active_page = 0
labels = None, None
last_active_term = d64ba4f9-edb7-4ced-942e-49a69033480f, 4f4cffb2-74fa-4d07-a7b4-c5f30ece39b2
order = 0
parent = child0
type = Notebook
[[[child2]]]
order = 0
parent = child1
position = 958
ratio = 0.49921875
type = HPaned
[[[child3]]]
order = 0
parent = child2
position = 502
ratio = 0.5
type = VPaned
[[[child6]]]
order = 1
parent = child2
position = 502
ratio = 0.5
type = VPaned
[[[child7]]]
order = 0
parent = child6
position = 251
ratio = 0.500996015936
type = VPaned
[[[terminal10]]]
command = lein repl; zsh
directory = /home/michael/.work-files/dive-networks/dive-web-app/
order = 1
parent = child6
profile = default
type = Terminal
uuid = a51152d4-6cb9-4d72-97fc-39bdf1376818
[[[terminal11]]]
command = ""
directory = /home/michael/.work-files/dive-networks/dive-web-app/
order = 1
parent = child1
profile = default
type = Terminal
uuid = 4f4cffb2-74fa-4d07-a7b4-c5f30ece39b2
[[[terminal4]]]
command = ""
directory = /home/michael/.work-files/dive-networks/dive-web-app/
order = 0
parent = child3
profile = default
type = Terminal
uuid = d64ba4f9-edb7-4ced-942e-49a69033480f
[[[terminal5]]]
command = tail -f figwheel_server.log; zsh
directory = /home/michael/.work-files/dive-networks/dive-web-app/
order = 1
parent = child3
profile = default
type = Terminal
uuid = 41f364c3-36b4-4af5-b999-2b2141b85319
[[[terminal8]]]
command = lein dev-css; zsh
directory = /home/michael/.work-files/dive-networks/dive-web-app/
order = 0
parent = child7
profile = default
type = Terminal
uuid = 5e14119d-8778-4226-a424-b9c5eca80292
[[[terminal9]]]
command = watch free -h; zsh
directory = /home/michael/.work-files/dive-networks/dive-web-app/
order = 1
parent = child7
profile = default
type = Terminal
uuid = 8eec6a48-cbfb-449c-b49e-704da6e5996d
[plugins]
[[GrepEditor]]
command = vim +{line} {filepath}
groups = file line
match = ([^ \t\n\r\f\v:]+?):([0-9]+)
[profiles]
[[default]]
background_color = "#060505"
background_darkness = 0.81
background_image = None
copy_on_selection = True
cursor_color = "#bbbbbb"
font = Consolas 10
foreground_color = "#d1c6ca"
palette = "#0a1b26:#bb0000:#7c00ff:#bbbb00:#00ff08:#00cdd7:#10bba2:#c8cac8:#545c7a:#ff5555:#ceef00:#ffe5f5:#5555ff:#ff6ddd:#2eb0ff:#f7fbff"
scrollback_lines = 20000
use_system_font = False
[[iterm-mike]]
background_color = "#060505"
background_darkness = 0.81
background_image = None
copy_on_selection = True
cursor_color = "#bbbbbb"
cursor_shape = underline
font = Consolas 10
foreground_color = "#d1c6ca"
palette = "#141414:#bb0000:#7c00ff:#bbbb00:#00ff08:#00cdd7:#10bba2:#cacaca:#555555:#ff5555:#ceef00:#ffe5f5:#5555ff:#ff6ddd:#2eb0ff:#f7fbff"
scrollback_lines = 20000
use_system_font = False
[[original]]
background_darkness = 0.81
background_image = None
background_type = transparent
copy_on_selection = True
cursor_color = "#cdcfbd"
cursor_shape = underline
font = DejaVu Sans Mono 12
palette = "#073642:#dc322f:#859900:#b58900:#268bd2:#d33682:#2aa198:#eee8d5:#002b36:#cb4b16:#586e75:#657b83:#839496:#6c71c4:#93a1a1:#fdf6e3"
scrollback_lines = 20000
use_system_font = False

55
config/terminator/plugins/search-google.py
View File

@@ -1,55 +0,0 @@
import gtk
import urllib
import terminatorlib.plugin as plugin
import re
# Written by John Cooper http://choffee.co.uk
# Copyright 2010 John Cooper
# See copyright file that comes with this file for full licence
# Modified by cgw 2011/11/06
# AVAILABLE must contain a list of all the classes that you want exposed
AVAILABLE = ['SearchGoogle']
_spaces = re.compile(" +")
# TODO: move some of the constants into a config object
class SearchGoogle(plugin.Plugin):
capabilities = ['terminal_menu']
def do_search(self, searchMenu):
"""Launch Google search for string"""
if not self.searchstring:
return
base_uri = "http://www.google.com/search?q=%s"
uri = base_uri % urllib.quote(self.searchstring.encode("utf-8"))
gtk.show_uri(None, uri, gtk.gdk.CURRENT_TIME)
def callback(self, menuitems, menu, terminal):
"""Add our menu item to the menu"""
self.terminal = terminal
item = gtk.ImageMenuItem(gtk.STOCK_FIND)
item.connect('activate', self.do_search)
if terminal.vte.get_has_selection():
clip = gtk.clipboard_get(gtk.gdk.SELECTION_PRIMARY)
self.searchstring = clip.wait_for_text().strip()
self.searchstring = self.searchstring.replace("\n", " ")
self.searchstring = self.searchstring.replace("\t", " ")
self.searchstring = _spaces.sub(" ", self.searchstring)
else:
self.searchstring = None
if self.searchstring:
if len(self.searchstring) > 40:
displaystring = self.searchstring[:37] + "..."
else:
displaystring = self.searchstring
item.set_label("Search Google for \"%s\"" % displaystring)
item.set_sensitive(True)
else:
item.set_label("Search Google")
item.set_sensitive(False)
# Avoid turning any underscores in selection into menu accelerators
item.set_use_underline(False)
menuitems.append(item)